Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Die-Cast Aluminio Piso de acceso elevado
A precision die-cast aluminum access-floor panel with orthotropic underside ribs for corrosion-resistant, non-magnetic cleanroom and technical-area installations.
- Monolithic Die-Cast Aluminum
- Non-Magnetic Construction
- Corrosion-Resistant Panel
- High Stiffness at Low Weight
Introducción del producto
Die-cast aluminum raised access flooring uses a one-piece panel with an orthotropic underside rib pattern that directs material where bending stiffness is needed. The corrosion-resistant, non-magnetic carrier panel is accurately manufactured for repeatable alignment on a 600 mm pedestal grid. Its open ribbed underside leaves space for service distribution and reduces panel weight compared with a solid slab. The top can remain coated aluminum or accept cleanroom PVC and conductive finishes, while each module can be removed to reach the plenum below.
Características clave
Orthotropic ribs provide high load capacity with controlled deflection while limiting unnecessary panel mass.
Non-magnetic aluminum is suitable around processes and instruments that restrict ferrous floor construction.
Conductive powder coating or resilient cleanroom covering can be bonded to the accurately machined top surface.
Preocupaciones del producto del cliente
Cleanroom access flooring must combine frequent panel removal with corrosion resistance, tight fit and low particle-generating movement.
Paint damage exposes conventional steel panels to corrosion in humid service voids.The carrier panel is a corrosion-resistant aluminum casting rather than a painted carbon-steel shell.
Heavy solid panels slow maintenance and increase handling risk during access.The ribbed orthotropic design removes non-working material while retaining structural stiffness.
Ferrous floor components interfere with magnetically sensitive instruments.The principal panel body is non-magnetic aluminum, with understructure materials selected separately for the room.
Inconsistent panel dimensions create rocking edges and dirt-trapping height differences.Precision casting and machining provide repeatable corner geometry across the modular grid.
Aplicaciones típicas
Semiconductor cleanroomsPrecision metrology roomsPharmaceutical clean manufacturing suitesMedical-device controlled areasHigh-specification technical rooms
Parámetros técnicos
Typical values for a high-load die-cast aluminum raised-floor panel are listed below.
| Materiales Core | One-piece die-cast aluminum alloy with orthotropic underside reinforcing ribs |
|---|---|
| Panel de espesor | 52–60 mm overall structural panel depth |
| Ancho efectivo | 600 mm nominal pedestal-grid width |
| Longitud máxima | 600 mm nominal modular panel length |
| Acero frente a espesor | 0 mm; the monolithic aluminum carrier has no steel facing |
| Densidad Core | Approximately 2700 kg/m³ for the die-cast aluminum alloy |
| Conductividad térmica | Approximately 130–180 W/(m·K) for common die-cast aluminum alloys |
| Superficie acabada | Conductive or non-conductive powder coating, with optional bonded cleanroom PVC |
| Tipo conjunto | Precision removable panels located on gasketed pedestal heads in a 600 mm grid |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Conductive or standard powder-coated surfaceBonded cleanroom PVC finishSolid or drilled ventilation configurationPedestal heights from approximately 50–2000 mm
Planning a Die-Cast Aluminum Raised Access Floor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
