Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Flooring Systemen
Die-Cast Aluminium erhöht Zugang Boden
A precision die-cast aluminum access-floor panel with orthotropic underside ribs for corrosion-resistant, non-magnetic cleanroom and technical-area installations.
- Monolithic Die-Cast Aluminum
- Non-Magnetic Construction
- Corrosion-Resistant Panel
- High Stiffness at Low Weight
Produkteinführung
Die-cast aluminum raised access flooring uses a one-piece panel with an orthotropic underside rib pattern that directs material where bending stiffness is needed. The corrosion-resistant, non-magnetic carrier panel is accurately manufactured for repeatable alignment on a 600 mm pedestal grid. Its open ribbed underside leaves space for service distribution and reduces panel weight compared with a solid slab. The top can remain coated aluminum or accept cleanroom PVC and conductive finishes, while each module can be removed to reach the plenum below.
Key Features
Orthotropic ribs provide high load capacity with controlled deflection while limiting unnecessary panel mass.
Non-magnetic aluminum is suitable around processes and instruments that restrict ferrous floor construction.
Conductive powder coating or resilient cleanroom covering can be bonded to the accurately machined top surface.
Kunden Produktbedenken
Cleanroom access flooring must combine frequent panel removal with corrosion resistance, tight fit and low particle-generating movement.
Paint damage exposes conventional steel panels to corrosion in humid service voids.The carrier panel is a corrosion-resistant aluminum casting rather than a painted carbon-steel shell.
Heavy solid panels slow maintenance and increase handling risk during access.The ribbed orthotropic design removes non-working material while retaining structural stiffness.
Ferrous floor components interfere with magnetically sensitive instruments.The principal panel body is non-magnetic aluminum, with understructure materials selected separately for the room.
Inconsistent panel dimensions create rocking edges and dirt-trapping height differences.Precision casting and machining provide repeatable corner geometry across the modular grid.
Typische Anwendungen
Semiconductor cleanroomsPrecision metrology roomsPharmaceutical clean manufacturing suitesMedical-device controlled areasHigh-specification technical rooms
Technische Parameter
Typical values for a high-load die-cast aluminum raised-floor panel are listed below.
| Core Material | One-piece die-cast aluminum alloy with orthotropic underside reinforcing ribs |
|---|---|
| Panel Dicke | 52–60 mm overall structural panel depth |
| Effektive Breite | 600 mm nominal pedestal-grid width |
| Maximale Länge | 600 mm nominal modular panel length |
| Stahl facing Dicke | 0 mm; the monolithic aluminum carrier has no steel facing |
| Kerndichte | Approximately 2700 kg/m³ for the die-cast aluminum alloy |
| Thermische Leitfähigkeit | Approximately 130–180 W/(m·K) for common die-cast aluminum alloys |
| Oberfläche Finish | Conductive or non-conductive powder coating, with optional bonded cleanroom PVC |
| Gemeinsamer Typ | Precision removable panels located on gasketed pedestal heads in a 600 mm grid |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Conductive or standard powder-coated surfaceBonded cleanroom PVC finishSolid or drilled ventilation configurationPedestal heights from approximately 50–2000 mm
Planning a Die-Cast Aluminum Raised Access Floor specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
