Silver die-cast aluminum raised floor panel above four complete pedestals

クリーンルームフロアシステム

ダイカストアルミニウム上昇アクセス床

A precision die-cast aluminum access-floor panel with orthotropic underside ribs for corrosion-resistant, non-magnetic cleanroom and technical-area installations.

Monolithic Die-Cast Aluminum
Non-Magnetic Construction
Corrosion-Resistant Panel
High Stiffness at Low Weight

見積もりリクエスト製品案内

商品紹介

Die-cast aluminum raised access flooring uses a one-piece panel with an orthotropic underside rib pattern that directs material where bending stiffness is needed. The corrosion-resistant, non-magnetic carrier panel is accurately manufactured for repeatable alignment on a 600 mm pedestal grid. Its open ribbed underside leaves space for service distribution and reduces panel weight compared with a solid slab. The top can remain coated aluminum or accept cleanroom PVC and conductive finishes, while each module can be removed to reach the plenum below.

主要な特徴

The one-piece aluminum casting avoids welded seams within the carrier panel and resists corrosion in controlled environments.

Orthotropic ribs provide high load capacity with controlled deflection while limiting unnecessary panel mass.

Non-magnetic aluminum is suitable around processes and instruments that restrict ferrous floor construction.

Conductive powder coating or resilient cleanroom covering can be bonded to the accurately machined top surface.

お客様の製品に関する懸念事項

Cleanroom access flooring must combine frequent panel removal with corrosion resistance, tight fit and low particle-generating movement.

Paint damage exposes conventional steel panels to corrosion in humid service voids.The carrier panel is a corrosion-resistant aluminum casting rather than a painted carbon-steel shell.

Heavy solid panels slow maintenance and increase handling risk during access.The ribbed orthotropic design removes non-working material while retaining structural stiffness.

Ferrous floor components interfere with magnetically sensitive instruments.The principal panel body is non-magnetic aluminum, with understructure materials selected separately for the room.

Inconsistent panel dimensions create rocking edges and dirt-trapping height differences.Precision casting and machining provide repeatable corner geometry across the modular grid.

典型的な用途

Semiconductor cleanroomsPrecision metrology roomsPharmaceutical clean manufacturing suitesMedical-device controlled areasHigh-specification technical rooms

技術的なパラメータ

Typical values for a high-load die-cast aluminum raised-floor panel are listed below.

コア材料	One-piece die-cast aluminum alloy with orthotropic underside reinforcing ribs
パネルの厚さ	52–60 mm overall structural panel depth
有効幅	600 mm nominal pedestal-grid width
最大長さ	600 mm nominal modular panel length
鋼鉄の厚さを直面する	0 mm; the monolithic aluminum carrier has no steel facing
コア密度	Approximately 2700 kg/m³ for the die-cast aluminum alloy
熱伝導率	Approximately 130–180 W/(m·K) for common die-cast aluminum alloys
表面仕上げ	Conductive or non-conductive powder coating, with optional bonded cleanroom PVC
ジョイントタイプ	Precision removable panels located on gasketed pedestal heads in a 600 mm grid
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Conductive or standard powder-coated surfaceBonded cleanroom PVC finishSolid or drilled ventilation configurationPedestal heights from approximately 50–2000 mm

Planning a Die-Cast Aluminum Raised Access Floor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する