İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Giysileri, PPE ve Tüketim Malzemeleri
Temiz Oda Bantı
Blue polyethylene cleanroom tape with a low-outgassing acrylic adhesive and plastic core for temporary sealing, marking and color coding.
- Conformable polyethylene backing for clean sealing and marking
- Low-residue pressure-sensitive adhesive
- Plastic-core roll prepared for controlled-area transfer
Ürün tanıtımı
Cleanroom Tape replaces uncontrolled office tape in packaging, maintenance and in-process identification tasks. Its smooth polyethylene backing conforms to bags, bins and curved components while limiting fiber release. A pressure-sensitive acrylic adhesive provides dependable temporary attachment and clean removal from qualified smooth substrates, and the plastic core avoids exposed paperboard at the center of the roll.
Ana Özellikler
Silicone-free acrylic adhesive supports low-residue removal
Hand-conformable film follows corners and irregular surfaces
Writable blue surface enables temporary coding with a qualified marker
Clean processing and double-bag options simplify area transfer
Müşteri Ürün Sorunları
General-purpose tapes may introduce paper fibers, adhesive transfer or uncontrolled plasticizers. The selected cleanroom tape must also balance peel strength with removability on the actual surface and throughout the required dwell time.
Adhesive residue can remain on stainless steel, plastic bins or equipment panels.Qualify a low-adhesion acrylic grade on each substrate and removal interval.
A stiff backing may lift around corners and curved packaging.Use a conformable polyethylene film and apply without trapped tension.
Paper cores can shed particles during dispensing.Specify a clean plastic core and controlled double-bagged presentation.
Excessive stretching can distort color-coded boundary lines.Unwind at a steady rate and press the tape down progressively with light pressure.
Tipik uygulamalar
Used for clean bag sealing, temporary equipment marking, bin identification, floor and bench coding, component protection, plate sealing and in-process work in controlled manufacturing or laboratory areas.
Teknik parametreler
The ranges below describe a common low-adhesion polyethylene cleanroom tape. Final width, color, adhesive level and clean packaging should match the sealing or identification process.
| Temel malzemeler | Low-density polyethylene film with silicone-free acrylic pressure-sensitive adhesive |
|---|---|
| Panel kalınlığı | 0.13-0.15 mm total tape thickness |
| Effective Width (Etkili Genişlik) | 12-76 mm roll width |
| Maksimum uzunluk | 32900 mm roll length |
| Çelik yüz yüze kalınlığı | 0 mm; Çelik yüzü kullanılmaz |
| Core Density (Çekirdek Yoğunluğu) | 910-940 kg/m³ LDPE backing |
| Termal İletkenlik | 0.30-0.42 W/(m·K), polyethylene grade dependent |
| Yüzey bitirme | Smooth matte blue writable polyethylene film |
| Ortak tip | Single-sided pressure-sensitive acrylic adhesive wound on plastic core |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Blue, white, red, green or yellow filmLow, medium or higher adhesion grade12-76 mm slit widthsAcrylic or silicone-free synthetic-rubber adhesiveNon-irradiated or irradiated presentationIndividual or double-bagged roll packaging
Planning a Cleanroom Tape specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
