Blue polyethylene cleanroom tape roll on a white plastic core in three-quarter view

Garmen Cleanroom, PPE dan Consumables

Cleanroom Tape Tape

Blue polyethylene cleanroom tape with a low-outgassing acrylic adhesive and plastic core for temporary sealing, marking and color coding.

Conformable polyethylene backing for clean sealing and marking
Low-residue pressure-sensitive adhesive
Plastic-core roll prepared for controlled-area transfer

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Cleanroom Tape replaces uncontrolled office tape in packaging, maintenance and in-process identification tasks. Its smooth polyethylene backing conforms to bags, bins and curved components while limiting fiber release. A pressure-sensitive acrylic adhesive provides dependable temporary attachment and clean removal from qualified smooth substrates, and the plastic core avoids exposed paperboard at the center of the roll.

Fitur utama:

Smooth LDPE film backing is waterproof and easy to wipe

Silicone-free acrylic adhesive supports low-residue removal

Hand-conformable film follows corners and irregular surfaces

Writable blue surface enables temporary coding with a qualified marker

Clean processing and double-bag options simplify area transfer

Kekhawatiran produk pelanggan

General-purpose tapes may introduce paper fibers, adhesive transfer or uncontrolled plasticizers. The selected cleanroom tape must also balance peel strength with removability on the actual surface and throughout the required dwell time.

Adhesive residue can remain on stainless steel, plastic bins or equipment panels.Qualify a low-adhesion acrylic grade on each substrate and removal interval.

A stiff backing may lift around corners and curved packaging.Use a conformable polyethylene film and apply without trapped tension.

Paper cores can shed particles during dispensing.Specify a clean plastic core and controlled double-bagged presentation.

Excessive stretching can distort color-coded boundary lines.Unwind at a steady rate and press the tape down progressively with light pressure.

Aplikasi yang Tipis

Used for clean bag sealing, temporary equipment marking, bin identification, floor and bench coding, component protection, plate sealing and in-process work in controlled manufacturing or laboratory areas.

Parameter teknis

The ranges below describe a common low-adhesion polyethylene cleanroom tape. Final width, color, adhesive level and clean packaging should match the sealing or identification process.

Bahan inti	Low-density polyethylene film with silicone-free acrylic pressure-sensitive adhesive
Ketebalan Panel (Panel Thickness)	0.13-0.15 mm total tape thickness
Efektif lebar	12-76 mm roll width
Panjang maksimum	32900 mm roll length
Baja menghadap ketebalan	0 mm; tidak ada baja menghadap yang digunakan
Kepadatan inti (core density)	910-940 kg/m³ LDPE backing
Konduktivitas Termal (Thermal Conductivity)	0.30-0.42 W/(m·K), polyethylene grade dependent
Permukaan selesai	Smooth matte blue writable polyethylene film
Jenis Bersama	Single-sided pressure-sensitive acrylic adhesive wound on plastic core
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Blue, white, red, green or yellow filmLow, medium or higher adhesion grade12-76 mm slit widthsAcrylic or silicone-free synthetic-rubber adhesiveNon-irradiated or irradiated presentationIndividual or double-bagged roll packaging

Planning a Cleanroom Tape specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami