Blue polyethylene cleanroom tape roll on a white plastic core in three-quarter view

클린룸 의류, PPE 및 소모품

클린룸 테이프

Blue polyethylene cleanroom tape with a low-outgassing acrylic adhesive and plastic core for temporary sealing, marking and color coding.

Conformable polyethylene backing for clean sealing and marking
Low-residue pressure-sensitive adhesive
Plastic-core roll prepared for controlled-area transfer

견적 요청 제품 찾아보기

상품 소개

Cleanroom Tape replaces uncontrolled office tape in packaging, maintenance and in-process identification tasks. Its smooth polyethylene backing conforms to bags, bins and curved components while limiting fiber release. A pressure-sensitive acrylic adhesive provides dependable temporary attachment and clean removal from qualified smooth substrates, and the plastic core avoids exposed paperboard at the center of the roll.

주요 기능

Smooth LDPE film backing is waterproof and easy to wipe

Silicone-free acrylic adhesive supports low-residue removal

Hand-conformable film follows corners and irregular surfaces

Writable blue surface enables temporary coding with a qualified marker

Clean processing and double-bag options simplify area transfer

고객 제품 관심사

General-purpose tapes may introduce paper fibers, adhesive transfer or uncontrolled plasticizers. The selected cleanroom tape must also balance peel strength with removability on the actual surface and throughout the required dwell time.

Adhesive residue can remain on stainless steel, plastic bins or equipment panels.Qualify a low-adhesion acrylic grade on each substrate and removal interval.

A stiff backing may lift around corners and curved packaging.Use a conformable polyethylene film and apply without trapped tension.

Paper cores can shed particles during dispensing.Specify a clean plastic core and controlled double-bagged presentation.

Excessive stretching can distort color-coded boundary lines.Unwind at a steady rate and press the tape down progressively with light pressure.

일반적인 응용 프로그램

Used for clean bag sealing, temporary equipment marking, bin identification, floor and bench coding, component protection, plate sealing and in-process work in controlled manufacturing or laboratory areas.

기술 매개변수

The ranges below describe a common low-adhesion polyethylene cleanroom tape. Final width, color, adhesive level and clean packaging should match the sealing or identification process.

핵심 재료	Low-density polyethylene film with silicone-free acrylic pressure-sensitive adhesive
패널 두께	0.13-0.15 mm total tape thickness
유효 폭	롤 폭 12 - 76 mm
최대 길이	32900 mm 롤 길이
강철 면면 두께	0 mm, 강철 면재 사용 없음
코어 밀도	910-940 kg/m³ LDPE backing
열전도도 (Thermal Conductivity)	0.30-0.42 W/(m·K), polyethylene grade dependent
표면 마무리	Smooth matte blue writable polyethylene film
접합 유형	Single-sided pressure-sensitive acrylic adhesive wound on plastic core
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Blue, white, red, green or yellow filmLow, medium or higher adhesion grade슬롯 폭 12 - 76 mmAcrylic or silicone-free synthetic-rubber adhesiveNon-irradiated or irradiated presentationIndividual or double-bagged roll packaging

Planning a Cleanroom Tape specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.