Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom Tape
Blue polyethylene cleanroom tape with a low-outgassing acrylic adhesive and plastic core for temporary sealing, marking and color coding.
- Conformable polyethylene backing for clean sealing and marking
- Low-residue pressure-sensitive adhesive
- Plastic-core roll prepared for controlled-area transfer
Introduction de produit
Cleanroom Tape replaces uncontrolled office tape in packaging, maintenance and in-process identification tasks. Its smooth polyethylene backing conforms to bags, bins and curved components while limiting fiber release. A pressure-sensitive acrylic adhesive provides dependable temporary attachment and clean removal from qualified smooth substrates, and the plastic core avoids exposed paperboard at the center of the roll.
Key Features
Silicone-free acrylic adhesive supports low-residue removal
Hand-conformable film follows corners and irregular surfaces
Writable blue surface enables temporary coding with a qualified marker
Clean processing and double-bag options simplify area transfer
Préoccupations du client produit
General-purpose tapes may introduce paper fibers, adhesive transfer or uncontrolled plasticizers. The selected cleanroom tape must also balance peel strength with removability on the actual surface and throughout the required dwell time.
Adhesive residue can remain on stainless steel, plastic bins or equipment panels.Qualify a low-adhesion acrylic grade on each substrate and removal interval.
A stiff backing may lift around corners and curved packaging.Use a conformable polyethylene film and apply without trapped tension.
Paper cores can shed particles during dispensing.Specify a clean plastic core and controlled double-bagged presentation.
Excessive stretching can distort color-coded boundary lines.Unwind at a steady rate and press the tape down progressively with light pressure.
Les applications typiques
Used for clean bag sealing, temporary equipment marking, bin identification, floor and bench coding, component protection, plate sealing and in-process work in controlled manufacturing or laboratory areas.
Paramètres techniques
The ranges below describe a common low-adhesion polyethylene cleanroom tape. Final width, color, adhesive level and clean packaging should match the sealing or identification process.
| Matériaux de base | Low-density polyethylene film with silicone-free acrylic pressure-sensitive adhesive |
|---|---|
| Panneau épaisseur | 0.13-0.15 mm total tape thickness |
| Largeur effective | 12-76 mm roll width |
| Longueur maximale | 32900 mm roll length |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 910-940 kg/m³ LDPE backing |
| Conductivité thermique | 0.30-0.42 W/(m·K), polyethylene grade dependent |
| surface finie | Smooth matte blue writable polyethylene film |
| Type joint | Single-sided pressure-sensitive acrylic adhesive wound on plastic core |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Blue, white, red, green or yellow filmLow, medium or higher adhesion grade12-76 mm slit widthsAcrylic or silicone-free synthetic-rubber adhesiveNon-irradiated or irradiated presentationIndividual or double-bagged roll packaging
Planning a Cleanroom Tape specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
