Blue polyethylene cleanroom tape roll on a white plastic core in three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Pita bilik bersih

Blue polyethylene cleanroom tape with a low-outgassing acrylic adhesive and plastic core for temporary sealing, marking and color coding.

Conformable polyethylene backing for clean sealing and marking
Low-residue pressure-sensitive adhesive
Plastic-core roll prepared for controlled-area transfer

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Cleanroom Tape replaces uncontrolled office tape in packaging, maintenance and in-process identification tasks. Its smooth polyethylene backing conforms to bags, bins and curved components while limiting fiber release. A pressure-sensitive acrylic adhesive provides dependable temporary attachment and clean removal from qualified smooth substrates, and the plastic core avoids exposed paperboard at the center of the roll.

Ciri-ciri Utama

Smooth LDPE film backing is waterproof and easy to wipe

Silicone-free acrylic adhesive supports low-residue removal

Hand-conformable film follows corners and irregular surfaces

Writable blue surface enables temporary coding with a qualified marker

Clean processing and double-bag options simplify area transfer

Kebimbangan Produk Pelanggan

General-purpose tapes may introduce paper fibers, adhesive transfer or uncontrolled plasticizers. The selected cleanroom tape must also balance peel strength with removability on the actual surface and throughout the required dwell time.

Adhesive residue can remain on stainless steel, plastic bins or equipment panels.Qualify a low-adhesion acrylic grade on each substrate and removal interval.

A stiff backing may lift around corners and curved packaging.Use a conformable polyethylene film and apply without trapped tension.

Paper cores can shed particles during dispensing.Specify a clean plastic core and controlled double-bagged presentation.

Excessive stretching can distort color-coded boundary lines.Unwind at a steady rate and press the tape down progressively with light pressure.

Permohonan yang biasa

Used for clean bag sealing, temporary equipment marking, bin identification, floor and bench coding, component protection, plate sealing and in-process work in controlled manufacturing or laboratory areas.

Parameter teknikal

The ranges below describe a common low-adhesion polyethylene cleanroom tape. Final width, color, adhesive level and clean packaging should match the sealing or identification process.

Bahan Teras	Low-density polyethylene film with silicone-free acrylic pressure-sensitive adhesive
Ketebalan Panel	0.13-0.15 mm total tape thickness
Lebar berkesan	12-76 mm roll width
Panjang maksimum	32900 mm roll length
Keluli Menghadapi Ketebalan	0 mm; tiada keluli menghadap digunakan
Ketumpatan teras	910-940 kg/m³ LDPE backing
Kekonduksian Terma	0.30-0.42 W/(m·K), polyethylene grade dependent
Kemasan permukaan	Smooth matte blue writable polyethylene film
Jenis Bersatu	Single-sided pressure-sensitive acrylic adhesive wound on plastic core
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Blue, white, red, green or yellow filmLow, medium or higher adhesion grade12-76 mm slit widthsAcrylic or silicone-free synthetic-rubber adhesiveNon-irradiated or irradiated presentationIndividual or double-bagged roll packaging

Planning a Cleanroom Tape specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami