Blue polyethylene cleanroom tape roll on a white plastic core in three-quarter view

クリーンルーム衣料品、 PPE 、消耗品

クリーンルームテープ

Blue polyethylene cleanroom tape with a low-outgassing acrylic adhesive and plastic core for temporary sealing, marking and color coding.

Conformable polyethylene backing for clean sealing and marking
Low-residue pressure-sensitive adhesive
Plastic-core roll prepared for controlled-area transfer

見積もりリクエスト製品案内

商品紹介

Cleanroom Tape replaces uncontrolled office tape in packaging, maintenance and in-process identification tasks. Its smooth polyethylene backing conforms to bags, bins and curved components while limiting fiber release. A pressure-sensitive acrylic adhesive provides dependable temporary attachment and clean removal from qualified smooth substrates, and the plastic core avoids exposed paperboard at the center of the roll.

主要な特徴

Smooth LDPE film backing is waterproof and easy to wipe

Silicone-free acrylic adhesive supports low-residue removal

Hand-conformable film follows corners and irregular surfaces

Writable blue surface enables temporary coding with a qualified marker

Clean processing and double-bag options simplify area transfer

お客様の製品に関する懸念事項

General-purpose tapes may introduce paper fibers, adhesive transfer or uncontrolled plasticizers. The selected cleanroom tape must also balance peel strength with removability on the actual surface and throughout the required dwell time.

Adhesive residue can remain on stainless steel, plastic bins or equipment panels.Qualify a low-adhesion acrylic grade on each substrate and removal interval.

A stiff backing may lift around corners and curved packaging.Use a conformable polyethylene film and apply without trapped tension.

Paper cores can shed particles during dispensing.Specify a clean plastic core and controlled double-bagged presentation.

Excessive stretching can distort color-coded boundary lines.Unwind at a steady rate and press the tape down progressively with light pressure.

典型的な用途

Used for clean bag sealing, temporary equipment marking, bin identification, floor and bench coding, component protection, plate sealing and in-process work in controlled manufacturing or laboratory areas.

技術的なパラメータ

The ranges below describe a common low-adhesion polyethylene cleanroom tape. Final width, color, adhesive level and clean packaging should match the sealing or identification process.

コア材料	Low-density polyethylene film with silicone-free acrylic pressure-sensitive adhesive
パネルの厚さ	0.13-0.15 mm total tape thickness
有効幅	12-76 mm roll width
最大長さ	32900 mm roll length
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	910-940 kg/m³ LDPE backing
熱伝導率	0.30-0.42 W/(m·K), polyethylene grade dependent
表面仕上げ	Smooth matte blue writable polyethylene film
ジョイントタイプ	Single-sided pressure-sensitive acrylic adhesive wound on plastic core
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Blue, white, red, green or yellow filmLow, medium or higher adhesion grade12-76 mm slit widthsAcrylic or silicone-free synthetic-rubber adhesiveNon-irradiated or irradiated presentationIndividual or double-bagged roll packaging

Planning a Cleanroom Tape specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する