İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Temizlik Odası Çanta Dump Station
A stainless sack-emptying station that captures dust as bags are opened and emptied through a safety grate into a receiving hopper or process line.
- Enclosed Bag-Opening Hood
- Rear Dust Extraction
- Safety Grate and Hopper
- Empty-Bag Disposal Option
Ürün tanıtımı
The bag dump station combines a waist-height hopper, hinged access hood and local extraction plenum. Operators place a sack on the loading shelf, open it inside the hood and empty material through a removable safety grate. Dust displaced from the hopper is drawn toward rear filters rather than into the operator's breathing zone. A side bag compactor, continuous liner or waste port can remove empty sacks without carrying residue back across the clean area.
Ana Özellikler
Rear extraction captures the dust plume directly above the hopper opening.
A removable safety grate prevents large packaging pieces from entering the process.
The hopper and ledges use radiused stainless geometry for cleaning access.
Optional empty-bag disposal keeps packaging residue within a defined route.
Müşteri Ürün Sorunları
Opening and collapsing bags releases dust at the same point where the receiving hopper displaces air upward.
A powder plume rises as the sack enters the hopper.Rear extraction captures displaced air immediately above the loading grate.
Bag fragments can fall into the process.A removable safety grate intercepts large packaging pieces before the hopper.
Operators carry dusty empty sacks through the room.A side disposal port or compactor contains the empty-bag route.
Powder remains in sharp hopper corners.Radiused welded stainless transitions improve access for wipe-down or wash-down.
Tipik uygulamalar
Powder ingredient chargingGranule sack emptyingTablet excipient additionClean-process hopper feeding
Teknik parametreler
Typical configurable construction ranges for a cleanroom bag dump station are listed below.
| Temel malzemeler | SUS304 or SUS316L welded hopper, loading shelf and hood with a powder-coated or stainless filter enclosure |
|---|---|
| Panel kalınlığı | 30-60 mm double-skin hood and filter sections |
| Effective Width (Etkili Genişlik) | 800-1500 mm clear bag-loading width |
| Maksimum uzunluk | Up to 2200 mm overall station depth |
| Çelik yüz yüze kalınlığı | 1.5-3.0 mm stainless hopper; 1.0-1.5 mm hood panels |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900 kg/m³ for stainless structural components |
| Termal İletkenlik | 14-16 W/(m·K) for austenitic stainless steel |
| Yüzey bitirme | Fine-brushed or electropolished stainless steel with radiused welded hopper surfaces |
| Ortak tip | Continuously welded hopper with gasketed access hood, removable grate and flanged process outlet |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Integrated bag compactorContinuous liner empty-bag portVibratory hopper aidLocal or remote dust collector
Planning a Cleanroom Bag Dump Station specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
