Stainless cleanroom bag dump station with enclosed loading hood

Оборудование для ламинарного потока и ограничения

Станция свалки мешков в чистых помещениях

A stainless sack-emptying station that captures dust as bags are opened and emptied through a safety grate into a receiving hopper or process line.

Enclosed Bag-Opening Hood
Rear Dust Extraction
Safety Grate and Hopper
Empty-Bag Disposal Option

Запрос котировки Просмотреть продукты

Введение продукции

The bag dump station combines a waist-height hopper, hinged access hood and local extraction plenum. Operators place a sack on the loading shelf, open it inside the hood and empty material through a removable safety grate. Dust displaced from the hopper is drawn toward rear filters rather than into the operator's breathing zone. A side bag compactor, continuous liner or waste port can remove empty sacks without carrying residue back across the clean area.

Основные характеристики

A deep loading shelf supports the bag before cutting and tipping.

Rear extraction captures the dust plume directly above the hopper opening.

A removable safety grate prevents large packaging pieces from entering the process.

The hopper and ledges use radiused stainless geometry for cleaning access.

Optional empty-bag disposal keeps packaging residue within a defined route.

Обеспокоенность клиентов продуктами

Opening and collapsing bags releases dust at the same point where the receiving hopper displaces air upward.

A powder plume rises as the sack enters the hopper.Rear extraction captures displaced air immediately above the loading grate.

Bag fragments can fall into the process.A removable safety grate intercepts large packaging pieces before the hopper.

Operators carry dusty empty sacks through the room.A side disposal port or compactor contains the empty-bag route.

Powder remains in sharp hopper corners.Radiused welded stainless transitions improve access for wipe-down or wash-down.

Типичные приложения

Powder ingredient chargingGranule sack emptyingTablet excipient additionClean-process hopper feeding

Технические параметры

Typical configurable construction ranges for a cleanroom bag dump station are listed below.

Основной материал	SUS304 or SUS316L welded hopper, loading shelf and hood with a powder-coated or stainless filter enclosure
Толщина панели	30-60 mm double-skin hood and filter sections
эффективная ширина	800-1500 mm clear bag-loading width
Максимальная длина	Up to 2200 mm overall station depth
Толщина линий стали	1.5-3.0 mm stainless hopper; 1.0-1.5 mm hood panels
Плотность ядра	Approximately 7900 kg/m³ for stainless structural components
Теплопроводимость	14-16 W/(m·K) for austenitic stainless steel
Поверхностная отделка	Fine-brushed or electropolished stainless steel with radiused welded hopper surfaces
Объединенный тип	Continuously welded hopper with gasketed access hood, removable grate and flanged process outlet
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Integrated bag compactorContinuous liner empty-bag portVibratory hopper aidLocal or remote dust collector

Planning a Cleanroom Bag Dump Station specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой