Stainless cleanroom bag dump station with enclosed loading hood

層流 · 封じ込め装置

クリーンルームバッグダンプステーション

A stainless sack-emptying station that captures dust as bags are opened and emptied through a safety grate into a receiving hopper or process line.

Enclosed Bag-Opening Hood
Rear Dust Extraction
Safety Grate and Hopper
Empty-Bag Disposal Option

見積もりリクエスト製品案内

商品紹介

The bag dump station combines a waist-height hopper, hinged access hood and local extraction plenum. Operators place a sack on the loading shelf, open it inside the hood and empty material through a removable safety grate. Dust displaced from the hopper is drawn toward rear filters rather than into the operator's breathing zone. A side bag compactor, continuous liner or waste port can remove empty sacks without carrying residue back across the clean area.

主要な特徴

A deep loading shelf supports the bag before cutting and tipping.

Rear extraction captures the dust plume directly above the hopper opening.

A removable safety grate prevents large packaging pieces from entering the process.

The hopper and ledges use radiused stainless geometry for cleaning access.

Optional empty-bag disposal keeps packaging residue within a defined route.

お客様の製品に関する懸念事項

Opening and collapsing bags releases dust at the same point where the receiving hopper displaces air upward.

A powder plume rises as the sack enters the hopper.Rear extraction captures displaced air immediately above the loading grate.

Bag fragments can fall into the process.A removable safety grate intercepts large packaging pieces before the hopper.

Operators carry dusty empty sacks through the room.A side disposal port or compactor contains the empty-bag route.

Powder remains in sharp hopper corners.Radiused welded stainless transitions improve access for wipe-down or wash-down.

典型的な用途

Powder ingredient chargingGranule sack emptyingTablet excipient additionClean-process hopper feeding

技術的なパラメータ

Typical configurable construction ranges for a cleanroom bag dump station are listed below.

コア材料	SUS304 or SUS316L welded hopper, loading shelf and hood with a powder-coated or stainless filter enclosure
パネルの厚さ	30-60 mm double-skin hood and filter sections
有効幅	800-1500 mm clear bag-loading width
最大長さ	Up to 2200 mm overall station depth
鋼鉄の厚さを直面する	1.5-3.0 mm stainless hopper; 1.0-1.5 mm hood panels
コア密度	Approximately 7900 kg/m³ for stainless structural components
熱伝導率	14-16 W/(m·K) for austenitic stainless steel
表面仕上げ	Fine-brushed or electropolished stainless steel with radiused welded hopper surfaces
ジョイントタイプ	Continuously welded hopper with gasketed access hood, removable grate and flanged process outlet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Integrated bag compactorContinuous liner empty-bag portVibratory hopper aidLocal or remote dust collector

Planning a Cleanroom Bag Dump Station specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する