Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Estación de descarga de bolsas limpias
A stainless sack-emptying station that captures dust as bags are opened and emptied through a safety grate into a receiving hopper or process line.
- Enclosed Bag-Opening Hood
- Rear Dust Extraction
- Safety Grate and Hopper
- Empty-Bag Disposal Option
Introducción del producto
The bag dump station combines a waist-height hopper, hinged access hood and local extraction plenum. Operators place a sack on the loading shelf, open it inside the hood and empty material through a removable safety grate. Dust displaced from the hopper is drawn toward rear filters rather than into the operator's breathing zone. A side bag compactor, continuous liner or waste port can remove empty sacks without carrying residue back across the clean area.
Características clave
Rear extraction captures the dust plume directly above the hopper opening.
A removable safety grate prevents large packaging pieces from entering the process.
The hopper and ledges use radiused stainless geometry for cleaning access.
Optional empty-bag disposal keeps packaging residue within a defined route.
Preocupaciones del producto del cliente
Opening and collapsing bags releases dust at the same point where the receiving hopper displaces air upward.
A powder plume rises as the sack enters the hopper.Rear extraction captures displaced air immediately above the loading grate.
Bag fragments can fall into the process.A removable safety grate intercepts large packaging pieces before the hopper.
Operators carry dusty empty sacks through the room.A side disposal port or compactor contains the empty-bag route.
Powder remains in sharp hopper corners.Radiused welded stainless transitions improve access for wipe-down or wash-down.
Aplicaciones típicas
Powder ingredient chargingGranule sack emptyingTablet excipient additionClean-process hopper feeding
Parámetros técnicos
Typical configurable construction ranges for a cleanroom bag dump station are listed below.
| Materiales Core | SUS304 or SUS316L welded hopper, loading shelf and hood with a powder-coated or stainless filter enclosure |
|---|---|
| Panel de espesor | 30-60 mm double-skin hood and filter sections |
| Ancho efectivo | 800-1500 mm clear bag-loading width |
| Longitud máxima | Up to 2200 mm overall station depth |
| Acero frente a espesor | 1.5-3.0 mm stainless hopper; 1.0-1.5 mm hood panels |
| Densidad Core | Approximately 7900 kg/m³ for stainless structural components |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Fine-brushed or electropolished stainless steel with radiused welded hopper surfaces |
| Tipo conjunto | Continuously welded hopper with gasketed access hood, removable grate and flanged process outlet |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Integrated bag compactorContinuous liner empty-bag portVibratory hopper aidLocal or remote dust collector
Planning a Cleanroom Bag Dump Station specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
