Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Laminar Flow und Containment Equipment
Cleanroom Bag Dump Station
A stainless sack-emptying station that captures dust as bags are opened and emptied through a safety grate into a receiving hopper or process line.
- Enclosed Bag-Opening Hood
- Rear Dust Extraction
- Safety Grate and Hopper
- Empty-Bag Disposal Option
Produkteinführung
The bag dump station combines a waist-height hopper, hinged access hood and local extraction plenum. Operators place a sack on the loading shelf, open it inside the hood and empty material through a removable safety grate. Dust displaced from the hopper is drawn toward rear filters rather than into the operator's breathing zone. A side bag compactor, continuous liner or waste port can remove empty sacks without carrying residue back across the clean area.
Key Features
Rear extraction captures the dust plume directly above the hopper opening.
A removable safety grate prevents large packaging pieces from entering the process.
The hopper and ledges use radiused stainless geometry for cleaning access.
Optional empty-bag disposal keeps packaging residue within a defined route.
Kunden Produktbedenken
Opening and collapsing bags releases dust at the same point where the receiving hopper displaces air upward.
A powder plume rises as the sack enters the hopper.Rear extraction captures displaced air immediately above the loading grate.
Bag fragments can fall into the process.A removable safety grate intercepts large packaging pieces before the hopper.
Operators carry dusty empty sacks through the room.A side disposal port or compactor contains the empty-bag route.
Powder remains in sharp hopper corners.Radiused welded stainless transitions improve access for wipe-down or wash-down.
Typische Anwendungen
Powder ingredient chargingGranule sack emptyingTablet excipient additionClean-process hopper feeding
Technische Parameter
Typical configurable construction ranges for a cleanroom bag dump station are listed below.
| Core Material | SUS304 or SUS316L welded hopper, loading shelf and hood with a powder-coated or stainless filter enclosure |
|---|---|
| Panel Dicke | 30-60 mm double-skin hood and filter sections |
| Effektive Breite | 800-1500 mm clear bag-loading width |
| Maximale Länge | Up to 2200 mm overall station depth |
| Stahl facing Dicke | 1.5-3.0 mm stainless hopper; 1.0-1.5 mm hood panels |
| Kerndichte | Approximately 7900 kg/m³ for stainless structural components |
| Thermische Leitfähigkeit | 14 - 16 W / (m · K) für austenitischen Edelstahl |
| Oberfläche Finish | Fine-brushed or electropolished stainless steel with radiused welded hopper surfaces |
| Gemeinsamer Typ | Continuously welded hopper with gasketed access hood, removable grate and flanged process outlet |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Integrated bag compactorContinuous liner empty-bag portVibratory hopper aidLocal or remote dust collector
Planning a Cleanroom Bag Dump Station specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
