Stainless cleanroom bag dump station with enclosed loading hood

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

클린룸 가방 덤프 스테이션

A stainless sack-emptying station that captures dust as bags are opened and emptied through a safety grate into a receiving hopper or process line.

Enclosed Bag-Opening Hood
Rear Dust Extraction
Safety Grate and Hopper
Empty-Bag Disposal Option

견적 요청 제품 찾아보기

상품 소개

The bag dump station combines a waist-height hopper, hinged access hood and local extraction plenum. Operators place a sack on the loading shelf, open it inside the hood and empty material through a removable safety grate. Dust displaced from the hopper is drawn toward rear filters rather than into the operator's breathing zone. A side bag compactor, continuous liner or waste port can remove empty sacks without carrying residue back across the clean area.

주요 기능

A deep loading shelf supports the bag before cutting and tipping.

Rear extraction captures the dust plume directly above the hopper opening.

A removable safety grate prevents large packaging pieces from entering the process.

The hopper and ledges use radiused stainless geometry for cleaning access.

Optional empty-bag disposal keeps packaging residue within a defined route.

고객 제품 관심사

Opening and collapsing bags releases dust at the same point where the receiving hopper displaces air upward.

A powder plume rises as the sack enters the hopper.Rear extraction captures displaced air immediately above the loading grate.

Bag fragments can fall into the process.A removable safety grate intercepts large packaging pieces before the hopper.

Operators carry dusty empty sacks through the room.A side disposal port or compactor contains the empty-bag route.

Powder remains in sharp hopper corners.Radiused welded stainless transitions improve access for wipe-down or wash-down.

일반적인 응용 프로그램

Powder ingredient chargingGranule sack emptyingTablet excipient additionClean-process hopper feeding

기술 매개변수

Typical configurable construction ranges for a cleanroom bag dump station are listed below.

핵심 재료	SUS304 or SUS316L welded hopper, loading shelf and hood with a powder-coated or stainless filter enclosure
패널 두께	30-60 mm double-skin hood and filter sections
유효 폭	800-1500 mm clear bag-loading width
최대 길이	Up to 2200 mm overall station depth
강철 면면 두께	1.5-3.0 mm stainless hopper; 1.0-1.5 mm hood panels
코어 밀도	Approximately 7900 kg/m³ for stainless structural components
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Fine-brushed or electropolished stainless steel with radiused welded hopper surfaces
접합 유형	Continuously welded hopper with gasketed access hood, removable grate and flanged process outlet
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Integrated bag compactorContinuous liner empty-bag portVibratory hopper aidLocal or remote dust collector

Planning a Cleanroom Bag Dump Station specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.