Stainless cleanroom bag dump station with enclosed loading hood

Aliran Laminar dan Peralatan Pengekangan

Stesen Dump Beg Bilik Bersih

A stainless sack-emptying station that captures dust as bags are opened and emptied through a safety grate into a receiving hopper or process line.

Enclosed Bag-Opening Hood
Rear Dust Extraction
Safety Grate and Hopper
Empty-Bag Disposal Option

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The bag dump station combines a waist-height hopper, hinged access hood and local extraction plenum. Operators place a sack on the loading shelf, open it inside the hood and empty material through a removable safety grate. Dust displaced from the hopper is drawn toward rear filters rather than into the operator's breathing zone. A side bag compactor, continuous liner or waste port can remove empty sacks without carrying residue back across the clean area.

Ciri-ciri Utama

A deep loading shelf supports the bag before cutting and tipping.

Rear extraction captures the dust plume directly above the hopper opening.

A removable safety grate prevents large packaging pieces from entering the process.

The hopper and ledges use radiused stainless geometry for cleaning access.

Optional empty-bag disposal keeps packaging residue within a defined route.

Kebimbangan Produk Pelanggan

Opening and collapsing bags releases dust at the same point where the receiving hopper displaces air upward.

A powder plume rises as the sack enters the hopper.Rear extraction captures displaced air immediately above the loading grate.

Bag fragments can fall into the process.A removable safety grate intercepts large packaging pieces before the hopper.

Operators carry dusty empty sacks through the room.A side disposal port or compactor contains the empty-bag route.

Powder remains in sharp hopper corners.Radiused welded stainless transitions improve access for wipe-down or wash-down.

Permohonan yang biasa

Powder ingredient chargingGranule sack emptyingTablet excipient additionClean-process hopper feeding

Parameter teknikal

Typical configurable construction ranges for a cleanroom bag dump station are listed below.

Bahan Teras	SUS304 or SUS316L welded hopper, loading shelf and hood with a powder-coated or stainless filter enclosure
Ketebalan Panel	30-60 mm double-skin hood and filter sections
Lebar berkesan	800-1500 mm clear bag-loading width
Panjang maksimum	Up to 2200 mm overall station depth
Keluli Menghadapi Ketebalan	1.5-3.0 mm stainless hopper; 1.0-1.5 mm hood panels
Ketumpatan teras	Approximately 7900 kg/m³ for stainless structural components
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Fine-brushed or electropolished stainless steel with radiused welded hopper surfaces
Jenis Bersatu	Continuously welded hopper with gasketed access hood, removable grate and flanged process outlet
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Integrated bag compactorContinuous liner empty-bag portVibratory hopper aidLocal or remote dust collector

Planning a Cleanroom Bag Dump Station specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami