Three-quarter view of activated carbon pocket filter with multiple dark tapered bags

Hava filtreleri ve kimyasal filtrasyon

Aktif Karbon Pocket Filtresi

A multi-pocket filter combining particulate media with a distributed activated-carbon layer to remove fine dust and light-duty gaseous contaminants in one HVAC stage.

Particle and Gas Filtration
Conical Pocket Geometry
Distributed Carbon Layer
Large Media Surface

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The activated carbon pocket filter combines an upstream particulate layer, a bonded activated-carbon layer and a stabilizing downstream support within multiple tapered pockets. The long pockets provide a much greater media area than a flat panel and distribute both particle loading and carbon adsorption over the airflow. Stitched or ultrasonically welded spacers keep the pockets separated, while a steel or molded-polymer header fits standard bag-filter housings. It is intended for indoor-air-quality duty where moderate odors and particulates must be addressed without installing two separate filter stages.

Ana Özellikler

A composite pocket medium captures particles and adsorbs light concentrations of gaseous pollutants in the same airflow pass.

Tapered pockets remain separated at design flow and use the available housing depth efficiently.

The distributed carbon layer exposes adsorbent across a broad area instead of concentrating it near the header.

A rigid header provides a familiar replacement interface for standard front- or side-access bag-filter systems.

Müşteri Ürün Sorunları

Separate particle and molecular stages consume valuable air-handler length, yet a thin carbon panel may not provide enough active area for the required airflow.

The air handler lacks space for a particle filter followed by a separate carbon cassette.Composite pocket media combines both functions within one standard bag-filter stage.

Flat carbon media has too little exposed area at the system airflow.Multiple deep pockets increase the available carbon-coated surface behind the same face opening.

Bag pockets touch and block one another at reduced airflow.Tapered geometry and internal spacing retain open channels through the filter bank.

Particulate loading covers the carbon before its adsorption capacity is used.A dedicated upstream particle layer protects the distributed carbon surface from coarse dust.

Tipik uygulamalar

Commercial building supply airHospital general ventilationAirport and transport facilitiesLaboratory support-area HVACCleanroom prefiltration with odor control

Teknik parametreler

Representative construction ranges for a combination activated-carbon pocket filter are shown below.

Temel malzemeler	Synthetic or glass-fibre particulate medium laminated with bonded activated-carbon media
Panel kalınlığı	360–640 mm pocket depth
Effective Width (Etkili Genişlik)	287–592 mm nominal header width
Maksimum uzunluk	Up to 640 mm pocket length
Çelik yüz yüze kalınlığı	0.6–0.9 mm painted or galvanized-steel header frame when specified
Core Density (Çekirdek Yoğunluğu)	Approximately 80–160 kg/m³ equivalent composite-media density including bonded carbon
Termal İletkenlik	Approximately 0.040–0.080 W/(m·K) for the dry composite pocket medium
Yüzey bitirme	Painted steel or molded polymer header with dark carbon-loaded pocket media
Ortak tip	Header-frame gasket or clamp-in pocket-filter connection
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Five to ten pocket configurationsSteel or incinerable polymer headerParticulate efficiency selected for the HVAC stageBroad-spectrum or impregnated carbon layer

Planning a Activated Carbon Pocket Filter specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun