Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro de bolsillo de carbón activado por
A multi-pocket filter combining particulate media with a distributed activated-carbon layer to remove fine dust and light-duty gaseous contaminants in one HVAC stage.
- Particle and Gas Filtration
- Conical Pocket Geometry
- Distributed Carbon Layer
- Large Media Surface
Introducción del producto
The activated carbon pocket filter combines an upstream particulate layer, a bonded activated-carbon layer and a stabilizing downstream support within multiple tapered pockets. The long pockets provide a much greater media area than a flat panel and distribute both particle loading and carbon adsorption over the airflow. Stitched or ultrasonically welded spacers keep the pockets separated, while a steel or molded-polymer header fits standard bag-filter housings. It is intended for indoor-air-quality duty where moderate odors and particulates must be addressed without installing two separate filter stages.
Características clave
Tapered pockets remain separated at design flow and use the available housing depth efficiently.
The distributed carbon layer exposes adsorbent across a broad area instead of concentrating it near the header.
A rigid header provides a familiar replacement interface for standard front- or side-access bag-filter systems.
Preocupaciones del producto del cliente
Separate particle and molecular stages consume valuable air-handler length, yet a thin carbon panel may not provide enough active area for the required airflow.
The air handler lacks space for a particle filter followed by a separate carbon cassette.Composite pocket media combines both functions within one standard bag-filter stage.
Flat carbon media has too little exposed area at the system airflow.Multiple deep pockets increase the available carbon-coated surface behind the same face opening.
Bag pockets touch and block one another at reduced airflow.Tapered geometry and internal spacing retain open channels through the filter bank.
Particulate loading covers the carbon before its adsorption capacity is used.A dedicated upstream particle layer protects the distributed carbon surface from coarse dust.
Aplicaciones típicas
Commercial building supply airHospital general ventilationAirport and transport facilitiesLaboratory support-area HVACCleanroom prefiltration with odor control
Parámetros técnicos
Representative construction ranges for a combination activated-carbon pocket filter are shown below.
| Materiales Core | Synthetic or glass-fibre particulate medium laminated with bonded activated-carbon media |
|---|---|
| Panel de espesor | 360–640 mm pocket depth |
| Ancho efectivo | 287–592 mm nominal header width |
| Longitud máxima | Up to 640 mm pocket length |
| Acero frente a espesor | 0.6–0.9 mm painted or galvanized-steel header frame when specified |
| Densidad Core | Approximately 80–160 kg/m³ equivalent composite-media density including bonded carbon |
| Conductividad térmica | Approximately 0.040–0.080 W/(m·K) for the dry composite pocket medium |
| Superficie acabada | Painted steel or molded polymer header with dark carbon-loaded pocket media |
| Tipo conjunto | Header-frame gasket or clamp-in pocket-filter connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Five to ten pocket configurationsSteel or incinerable polymer headerParticulate efficiency selected for the HVAC stageBroad-spectrum or impregnated carbon layer
Planning a Activated Carbon Pocket Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
