English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Мебель для чистых комнат и изделия из нержавеющей стали
Отходы из нержавеющей стали
A fully welded Type 304 stainless open-frame waste sack holder with a circular bag-clamping ring, blue 75 L cleanroom liner and stable raised base frame.
- Open inspectable frame
- Positive bag clamping ring
- 75 L blue cleanroom liner
- Raised cleanable base
Введение продукции
The stainless steel waste bin supports a disposable cleanroom sack without enclosing it inside a second rigid vessel. A fully welded Type 304 frame positions a 350 mm circular opening at convenient standing height. The blue 75 L liner folds over the upper ring and is captured by a hinged stainless clamping band, preventing the mouth from slipping downward as the load grows. Four sealed uprights join a broad raised base that remains visible from every side for routine floor and frame cleaning.
Основные характеристики
A rigid stainless clamping band retains the bag mouth without elastic cords or degradable clips.
Four sealed uprights carry the loaded ring into a broad base rather than depending on the liner itself.
The blue liner provides immediate visual separation from the silver holder during bag replacement.
Обеспокоенность клиентов продуктами
A simple cleanroom waste point must hold a flexible liner reliably while leaving the supporting frame and surrounding floor easy to see and wipe.
A loaded liner slips through a loose circular support ring.The hinged stainless clamp compresses the folded bag edge around the complete 350 mm opening.
Elastic bag ties shed or deteriorate after repeated disinfectant exposure.The all-metal retaining band closes mechanically without elastic components.
A closed shell hides drips between the bag and the waste holder.The open four-post frame keeps the liner exterior visible throughout use.
Narrow feet leave the tall bag stand unstable when waste is dropped from one side.A wide welded base distributes the ring load and maintains a low structural footprint.
Типичные приложения
Cleanroom dry consumable disposalGowning-room wrapper collectionLaboratory wipe segregationMedical-device packaging scrap holdingPharmaceutical non-sharp waste points
Технические параметры
Typical configurable specifications for an open-frame stainless cleanroom sack holder are listed below.
| Основной материал | Type 304 stainless welded frame and clamping ring with removable cobalt-blue cleanroom liner |
|---|---|
| Толщина панели | 1.5 mm stainless tubular frame wall |
| эффективная ширина | 350 mm clear bag-ring diameter |
| Максимальная длина | 490 mm maximum base width |
| Толщина линий стали | 1.5 mm Type 304 frame tube wall; 1.2 mm clamping band |
| Плотность ядра | 7900–8000 kg/m³ for Type 304 stainless components |
| Теплопроводимость | 14–17 W/(m·K) for Type 304 stainless components |
| Поверхностная отделка | Uniform dull-brushed stainless frame with contrasting cobalt-blue cleanroom liner |
| Объединенный тип | Fully welded sealed-post frame with hinged over-center bag-clamping ring |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Type 316L stainless frame40 L or 100 L liner sizeConductive blue ESD linerLift-off stainless cover
Planning a Stainless Steel Waste Bin specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
