Open-frame stainless cleanroom waste bin with blue liner

クリーンルーム家具 · ステンレス製品

ステンレス鋼の廃棄物箱

A fully welded Type 304 stainless open-frame waste sack holder with a circular bag-clamping ring, blue 75 L cleanroom liner and stable raised base frame.

Open inspectable frame
Positive bag clamping ring
75 L blue cleanroom liner
Raised cleanable base

見積もりリクエスト製品案内

商品紹介

The stainless steel waste bin supports a disposable cleanroom sack without enclosing it inside a second rigid vessel. A fully welded Type 304 frame positions a 350 mm circular opening at convenient standing height. The blue 75 L liner folds over the upper ring and is captured by a hinged stainless clamping band, preventing the mouth from slipping downward as the load grows. Four sealed uprights join a broad raised base that remains visible from every side for routine floor and frame cleaning.

主要な特徴

The open frame exposes the liner exterior and all structural surfaces for direct inspection.

A rigid stainless clamping band retains the bag mouth without elastic cords or degradable clips.

Four sealed uprights carry the loaded ring into a broad base rather than depending on the liner itself.

The blue liner provides immediate visual separation from the silver holder during bag replacement.

お客様の製品に関する懸念事項

A simple cleanroom waste point must hold a flexible liner reliably while leaving the supporting frame and surrounding floor easy to see and wipe.

A loaded liner slips through a loose circular support ring.The hinged stainless clamp compresses the folded bag edge around the complete 350 mm opening.

Elastic bag ties shed or deteriorate after repeated disinfectant exposure.The all-metal retaining band closes mechanically without elastic components.

A closed shell hides drips between the bag and the waste holder.The open four-post frame keeps the liner exterior visible throughout use.

Narrow feet leave the tall bag stand unstable when waste is dropped from one side.A wide welded base distributes the ring load and maintains a low structural footprint.

典型的な用途

Cleanroom dry consumable disposalGowning-room wrapper collectionLaboratory wipe segregationMedical-device packaging scrap holdingPharmaceutical non-sharp waste points

技術的なパラメータ

Typical configurable specifications for an open-frame stainless cleanroom sack holder are listed below.

コア材料	Type 304 stainless welded frame and clamping ring with removable cobalt-blue cleanroom liner
パネルの厚さ	1.5 mm stainless tubular frame wall
有効幅	350 mm clear bag-ring diameter
最大長さ	490 mm maximum base width
鋼鉄の厚さを直面する	1.5 mm Type 304 frame tube wall; 1.2 mm clamping band
コア密度	7900–8000 kg/m³ for Type 304 stainless components
熱伝導率	タイプ 304 ステンレス部品用 14 〜 17 W / （m · K）
表面仕上げ	Uniform dull-brushed stainless frame with contrasting cobalt-blue cleanroom liner
ジョイントタイプ	Fully welded sealed-post frame with hinged over-center bag-clamping ring
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Z タイプ 316L ステンレスフレーム40 L or 100 L liner sizeConductive blue ESD linerLift-off stainless cover

Planning a Stainless Steel Waste Bin specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する