Open-frame stainless cleanroom waste bin with blue liner

Perabot bilik bersih dan produk keluli tahan karat

Bin buangan keluli tahan karat

A fully welded Type 304 stainless open-frame waste sack holder with a circular bag-clamping ring, blue 75 L cleanroom liner and stable raised base frame.

Open inspectable frame
Positive bag clamping ring
75 L blue cleanroom liner
Raised cleanable base

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The stainless steel waste bin supports a disposable cleanroom sack without enclosing it inside a second rigid vessel. A fully welded Type 304 frame positions a 350 mm circular opening at convenient standing height. The blue 75 L liner folds over the upper ring and is captured by a hinged stainless clamping band, preventing the mouth from slipping downward as the load grows. Four sealed uprights join a broad raised base that remains visible from every side for routine floor and frame cleaning.

Ciri-ciri Utama

The open frame exposes the liner exterior and all structural surfaces for direct inspection.

A rigid stainless clamping band retains the bag mouth without elastic cords or degradable clips.

Four sealed uprights carry the loaded ring into a broad base rather than depending on the liner itself.

The blue liner provides immediate visual separation from the silver holder during bag replacement.

Kebimbangan Produk Pelanggan

A simple cleanroom waste point must hold a flexible liner reliably while leaving the supporting frame and surrounding floor easy to see and wipe.

A loaded liner slips through a loose circular support ring.The hinged stainless clamp compresses the folded bag edge around the complete 350 mm opening.

Elastic bag ties shed or deteriorate after repeated disinfectant exposure.The all-metal retaining band closes mechanically without elastic components.

A closed shell hides drips between the bag and the waste holder.The open four-post frame keeps the liner exterior visible throughout use.

Narrow feet leave the tall bag stand unstable when waste is dropped from one side.A wide welded base distributes the ring load and maintains a low structural footprint.

Permohonan yang biasa

Cleanroom dry consumable disposalGowning-room wrapper collectionLaboratory wipe segregationMedical-device packaging scrap holdingPharmaceutical non-sharp waste points

Parameter teknikal

Typical configurable specifications for an open-frame stainless cleanroom sack holder are listed below.

Bahan Teras	Type 304 stainless welded frame and clamping ring with removable cobalt-blue cleanroom liner
Ketebalan Panel	1.5 mm stainless tubular frame wall
Lebar berkesan	350 mm clear bag-ring diameter
Panjang maksimum	490 mm maximum base width
Keluli Menghadapi Ketebalan	1.5 mm Type 304 frame tube wall; 1.2 mm clamping band
Ketumpatan teras	7900–8000 kg/m³ for Type 304 stainless components
Kekonduksian Terma	14-17 W / (m · K) untuk komponen tahan karat Jenis 304
Kemasan permukaan	Uniform dull-brushed stainless frame with contrasting cobalt-blue cleanroom liner
Jenis Bersatu	Fully welded sealed-post frame with hinged over-center bag-clamping ring
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Jenis 316L bingkai tahan karat40 L or 100 L liner sizeConductive blue ESD linerLift-off stainless cover

Planning a Stainless Steel Waste Bin specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami