Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Acier inoxydable déchets bin par
A fully welded Type 304 stainless open-frame waste sack holder with a circular bag-clamping ring, blue 75 L cleanroom liner and stable raised base frame.
- Open inspectable frame
- Positive bag clamping ring
- 75 L blue cleanroom liner
- Raised cleanable base
Introduction de produit
The stainless steel waste bin supports a disposable cleanroom sack without enclosing it inside a second rigid vessel. A fully welded Type 304 frame positions a 350 mm circular opening at convenient standing height. The blue 75 L liner folds over the upper ring and is captured by a hinged stainless clamping band, preventing the mouth from slipping downward as the load grows. Four sealed uprights join a broad raised base that remains visible from every side for routine floor and frame cleaning.
Key Features
A rigid stainless clamping band retains the bag mouth without elastic cords or degradable clips.
Four sealed uprights carry the loaded ring into a broad base rather than depending on the liner itself.
The blue liner provides immediate visual separation from the silver holder during bag replacement.
Préoccupations du client produit
A simple cleanroom waste point must hold a flexible liner reliably while leaving the supporting frame and surrounding floor easy to see and wipe.
A loaded liner slips through a loose circular support ring.The hinged stainless clamp compresses the folded bag edge around the complete 350 mm opening.
Elastic bag ties shed or deteriorate after repeated disinfectant exposure.The all-metal retaining band closes mechanically without elastic components.
A closed shell hides drips between the bag and the waste holder.The open four-post frame keeps the liner exterior visible throughout use.
Narrow feet leave the tall bag stand unstable when waste is dropped from one side.A wide welded base distributes the ring load and maintains a low structural footprint.
Les applications typiques
Cleanroom dry consumable disposalGowning-room wrapper collectionLaboratory wipe segregationMedical-device packaging scrap holdingPharmaceutical non-sharp waste points
Paramètres techniques
Typical configurable specifications for an open-frame stainless cleanroom sack holder are listed below.
| Matériaux de base | Type 304 stainless welded frame and clamping ring with removable cobalt-blue cleanroom liner |
|---|---|
| Panneau épaisseur | 1.5 mm stainless tubular frame wall |
| Largeur effective | 350 mm clear bag-ring diameter |
| Longueur maximale | 490 mm maximum base width |
| Acier face épaisseur | 1.5 mm Type 304 frame tube wall; 1.2 mm clamping band |
| Densité Core | 7900–8000 kg/m³ for Type 304 stainless components |
| Conductivité thermique | 14 - 17 W / (m · K) pour les composants inoxydables de type 304 |
| surface finie | Uniform dull-brushed stainless frame with contrasting cobalt-blue cleanroom liner |
| Type joint | Fully welded sealed-post frame with hinged over-center bag-clamping ring |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Type 316L cadre inoxydable40 L or 100 L liner sizeConductive blue ESD linerLift-off stainless cover
Planning a Stainless Steel Waste Bin specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
