Open-frame stainless cleanroom waste bin with blue liner

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 쓰레기통

A fully welded Type 304 stainless open-frame waste sack holder with a circular bag-clamping ring, blue 75 L cleanroom liner and stable raised base frame.

Open inspectable frame
Positive bag clamping ring
75 L blue cleanroom liner
Raised cleanable base

견적 요청 제품 찾아보기

상품 소개

The stainless steel waste bin supports a disposable cleanroom sack without enclosing it inside a second rigid vessel. A fully welded Type 304 frame positions a 350 mm circular opening at convenient standing height. The blue 75 L liner folds over the upper ring and is captured by a hinged stainless clamping band, preventing the mouth from slipping downward as the load grows. Four sealed uprights join a broad raised base that remains visible from every side for routine floor and frame cleaning.

주요 기능

The open frame exposes the liner exterior and all structural surfaces for direct inspection.

A rigid stainless clamping band retains the bag mouth without elastic cords or degradable clips.

Four sealed uprights carry the loaded ring into a broad base rather than depending on the liner itself.

The blue liner provides immediate visual separation from the silver holder during bag replacement.

고객 제품 관심사

A simple cleanroom waste point must hold a flexible liner reliably while leaving the supporting frame and surrounding floor easy to see and wipe.

A loaded liner slips through a loose circular support ring.The hinged stainless clamp compresses the folded bag edge around the complete 350 mm opening.

Elastic bag ties shed or deteriorate after repeated disinfectant exposure.The all-metal retaining band closes mechanically without elastic components.

A closed shell hides drips between the bag and the waste holder.The open four-post frame keeps the liner exterior visible throughout use.

Narrow feet leave the tall bag stand unstable when waste is dropped from one side.A wide welded base distributes the ring load and maintains a low structural footprint.

일반적인 응용 프로그램

Cleanroom dry consumable disposalGowning-room wrapper collectionLaboratory wipe segregationMedical-device packaging scrap holdingPharmaceutical non-sharp waste points

기술 매개변수

Typical configurable specifications for an open-frame stainless cleanroom sack holder are listed below.

핵심 재료	Type 304 stainless welded frame and clamping ring with removable cobalt-blue cleanroom liner
패널 두께	1.5 mm stainless tubular frame wall
유효 폭	350 mm clear bag-ring diameter
최대 길이	490 mm maximum base width
강철 면면 두께	1.5 mm Type 304 frame tube wall; 1.2 mm clamping band
코어 밀도	7900–8000 kg/m³ for Type 304 stainless components
열전도도 (Thermal Conductivity)	14 - 17 W / (m · K) Type 304 스테인레스 부품
표면 마무리	Uniform dull-brushed stainless frame with contrasting cobalt-blue cleanroom liner
접합 유형	Fully welded sealed-post frame with hinged over-center bag-clamping ring
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

유형 316 L 스테인레스 프레임40 L or 100 L liner sizeConductive blue ESD linerLift-off stainless cover

Planning a Stainless Steel Waste Bin specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.