Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Muebles de sala limpia y productos de acero inoxidable
Residuos de acero inoxidable
A fully welded Type 304 stainless open-frame waste sack holder with a circular bag-clamping ring, blue 75 L cleanroom liner and stable raised base frame.
- Open inspectable frame
- Positive bag clamping ring
- 75 L blue cleanroom liner
- Raised cleanable base
Introducción del producto
The stainless steel waste bin supports a disposable cleanroom sack without enclosing it inside a second rigid vessel. A fully welded Type 304 frame positions a 350 mm circular opening at convenient standing height. The blue 75 L liner folds over the upper ring and is captured by a hinged stainless clamping band, preventing the mouth from slipping downward as the load grows. Four sealed uprights join a broad raised base that remains visible from every side for routine floor and frame cleaning.
Características clave
A rigid stainless clamping band retains the bag mouth without elastic cords or degradable clips.
Four sealed uprights carry the loaded ring into a broad base rather than depending on the liner itself.
The blue liner provides immediate visual separation from the silver holder during bag replacement.
Preocupaciones del producto del cliente
A simple cleanroom waste point must hold a flexible liner reliably while leaving the supporting frame and surrounding floor easy to see and wipe.
A loaded liner slips through a loose circular support ring.The hinged stainless clamp compresses the folded bag edge around the complete 350 mm opening.
Elastic bag ties shed or deteriorate after repeated disinfectant exposure.The all-metal retaining band closes mechanically without elastic components.
A closed shell hides drips between the bag and the waste holder.The open four-post frame keeps the liner exterior visible throughout use.
Narrow feet leave the tall bag stand unstable when waste is dropped from one side.A wide welded base distributes the ring load and maintains a low structural footprint.
Aplicaciones típicas
Cleanroom dry consumable disposalGowning-room wrapper collectionLaboratory wipe segregationMedical-device packaging scrap holdingPharmaceutical non-sharp waste points
Parámetros técnicos
Typical configurable specifications for an open-frame stainless cleanroom sack holder are listed below.
| Materiales Core | Type 304 stainless welded frame and clamping ring with removable cobalt-blue cleanroom liner |
|---|---|
| Panel de espesor | 1.5 mm stainless tubular frame wall |
| Ancho efectivo | 350 mm clear bag-ring diameter |
| Longitud máxima | 490 mm maximum base width |
| Acero frente a espesor | 1.5 mm Type 304 frame tube wall; 1.2 mm clamping band |
| Densidad Core | 7900–8000 kg/m³ for Type 304 stainless components |
| Conductividad térmica | 14 - 17 W / (m · K) para componentes inoxidables tipo 304 |
| Superficie acabada | Uniform dull-brushed stainless frame with contrasting cobalt-blue cleanroom liner |
| Tipo conjunto | Fully welded sealed-post frame with hinged over-center bag-clamping ring |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Marco inoxidable tipo 316L40 L or 100 L liner sizeConductive blue ESD linerLift-off stainless cover
Planning a Stainless Steel Waste Bin specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
