English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
ОВК и оборудование для обработки воздуха в чистых помещениях
Модульный агрегат по обработке воздуха
A section-built double-skin air handler that combines filtration, thermal treatment, fan and humidity-control functions in a serviceable cleanroom HVAC platform.
- Configurable Treatment Sections
- Thermal-Break Double Skin
- Low-Leakage Panel Joints
- Service-Friendly Access
Введение продукции
The modular air handling unit is assembled from matched casing sections around a rigid corrosion-protected frame. Filter banks, chilled-water or direct-expansion coils, heating coils, humidifiers, energy-recovery devices and plug-fan arrays can be placed in the required process order. Smooth internal panels and gasketed access doors support routine cleaning, while thermally separated skins limit condensation on the outer casing. Shipping splits allow large units to pass through plant-room access routes without sacrificing a continuous sealed air path after assembly.
Основные характеристики
Double-skin insulated panels reduce casing heat gain, radiated fan noise and surface condensation risk.
Gasketed block joints and access doors maintain a controlled air path while permitting component replacement.
Direct-drive plug fans or fan arrays provide stable airflow control without belts in the supply airstream.
Обеспокоенность клиентов продуктами
A cleanroom air handler must fit the building, deliver the scheduled treatment sequence and remain accessible without creating uncontrolled leakage paths.
A fixed factory package cannot accommodate the required filter, coil and humidifier sequence.Individual modules are arranged around the specified psychrometric process and pressure-drop budget.
Large equipment cannot pass through the available plant-room opening.Engineered shipping splits divide the casing into manageable sections with gasketed field block joints.
Cold casing bridges create condensation and staining around panel frames.Thermal-break profiles and continuous insulation separate the inner and outer metal skins.
Fan maintenance interrupts the entire cleanroom supply system.Multi-fan arrays can provide staged capacity and allow one fan position to be isolated for service.
Типичные приложения
Pharmaceutical cleanroom HVAC plantsBiotechnology production suitesMedical-device manufacturingElectronics cleanroomsLaboratory air-treatment systems
Технические параметры
Typical construction ranges for a configurable cleanroom modular air-handling unit are listed below.
| Основной материал | Rigid polyurethane foam or high-density mineral-wool insulation within double-skin casing panels |
|---|---|
| Толщина панели | 50–70 mm insulated double-skin casing |
| эффективная ширина | 1000–4000 mm nominal casing width |
| Максимальная длина | Up to 12000 mm assembled length using bolted shipping sections |
| Толщина линий стали | 0.5–1.0 mm inner and outer sheet, selected by casing duty |
| Плотность ядра | 40–45 kg/m³ polyurethane or 80–120 kg/m³ mineral wool |
| Теплопроводимость | 0.022–0.040 W/(m·K), depending on insulation material |
| Поверхностная отделка | Powder-coated galvanized outer skin with galvanized or 304 stainless-steel cleanable inner skin |
| Объединенный тип | Thermal-break aluminum frame with compression-gasketed panel and block joints |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Chilled-water, hot-water, steam or DX coilsPlug-fan array or single EC fan sectionBag, compact and terminal filter stagesHumidifier, dehumidifier and heat-recovery modules
Planning a Modular Air Handling Unit specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
