Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Unidad Modular de Manejo de Aire
A section-built double-skin air handler that combines filtration, thermal treatment, fan and humidity-control functions in a serviceable cleanroom HVAC platform.
- Configurable Treatment Sections
- Thermal-Break Double Skin
- Low-Leakage Panel Joints
- Service-Friendly Access
Introducción del producto
The modular air handling unit is assembled from matched casing sections around a rigid corrosion-protected frame. Filter banks, chilled-water or direct-expansion coils, heating coils, humidifiers, energy-recovery devices and plug-fan arrays can be placed in the required process order. Smooth internal panels and gasketed access doors support routine cleaning, while thermally separated skins limit condensation on the outer casing. Shipping splits allow large units to pass through plant-room access routes without sacrificing a continuous sealed air path after assembly.
Características clave
Double-skin insulated panels reduce casing heat gain, radiated fan noise and surface condensation risk.
Gasketed block joints and access doors maintain a controlled air path while permitting component replacement.
Direct-drive plug fans or fan arrays provide stable airflow control without belts in the supply airstream.
Preocupaciones del producto del cliente
A cleanroom air handler must fit the building, deliver the scheduled treatment sequence and remain accessible without creating uncontrolled leakage paths.
A fixed factory package cannot accommodate the required filter, coil and humidifier sequence.Individual modules are arranged around the specified psychrometric process and pressure-drop budget.
Large equipment cannot pass through the available plant-room opening.Engineered shipping splits divide the casing into manageable sections with gasketed field block joints.
Cold casing bridges create condensation and staining around panel frames.Thermal-break profiles and continuous insulation separate the inner and outer metal skins.
Fan maintenance interrupts the entire cleanroom supply system.Multi-fan arrays can provide staged capacity and allow one fan position to be isolated for service.
Aplicaciones típicas
Pharmaceutical cleanroom HVAC plantsBiotechnology production suitesFabricación de dispositivos médicosElectronics cleanroomsLaboratory air-treatment systems
Parámetros técnicos
Typical construction ranges for a configurable cleanroom modular air-handling unit are listed below.
| Materiales Core | Rigid polyurethane foam or high-density mineral-wool insulation within double-skin casing panels |
|---|---|
| Panel de espesor | 50–70 mm insulated double-skin casing |
| Ancho efectivo | 1000–4000 mm nominal casing width |
| Longitud máxima | Up to 12000 mm assembled length using bolted shipping sections |
| Acero frente a espesor | 0.5–1.0 mm inner and outer sheet, selected by casing duty |
| Densidad Core | 40–45 kg/m³ polyurethane or 80–120 kg/m³ mineral wool |
| Conductividad térmica | 0.022–0.040 W/(m·K), depending on insulation material |
| Superficie acabada | Powder-coated galvanized outer skin with galvanized or 304 stainless-steel cleanable inner skin |
| Tipo conjunto | Thermal-break aluminum frame with compression-gasketed panel and block joints |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Chilled-water, hot-water, steam or DX coilsPlug-fan array or single EC fan sectionBag, compact and terminal filter stagesHumidifier, dehumidifier and heat-recovery modules
Planning a Modular Air Handling Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
