Modular cleanroom air handling unit with multiple insulated treatment sections

클린룸 HVAC 및 공기 처리 장비

모듈식 공기 처리 장치

A section-built double-skin air handler that combines filtration, thermal treatment, fan and humidity-control functions in a serviceable cleanroom HVAC platform.

Configurable Treatment Sections
Thermal-Break Double Skin
Low-Leakage Panel Joints
Service-Friendly Access

견적 요청 제품 찾아보기

상품 소개

The modular air handling unit is assembled from matched casing sections around a rigid corrosion-protected frame. Filter banks, chilled-water or direct-expansion coils, heating coils, humidifiers, energy-recovery devices and plug-fan arrays can be placed in the required process order. Smooth internal panels and gasketed access doors support routine cleaning, while thermally separated skins limit condensation on the outer casing. Shipping splits allow large units to pass through plant-room access routes without sacrificing a continuous sealed air path after assembly.

주요 기능

Standardized casing modules allow treatment functions to be arranged in the actual airflow sequence rather than forced into a fixed package.

Double-skin insulated panels reduce casing heat gain, radiated fan noise and surface condensation risk.

Gasketed block joints and access doors maintain a controlled air path while permitting component replacement.

Direct-drive plug fans or fan arrays provide stable airflow control without belts in the supply airstream.

고객 제품 관심사

A cleanroom air handler must fit the building, deliver the scheduled treatment sequence and remain accessible without creating uncontrolled leakage paths.

A fixed factory package cannot accommodate the required filter, coil and humidifier sequence.Individual modules are arranged around the specified psychrometric process and pressure-drop budget.

Large equipment cannot pass through the available plant-room opening.Engineered shipping splits divide the casing into manageable sections with gasketed field block joints.

Cold casing bridges create condensation and staining around panel frames.Thermal-break profiles and continuous insulation separate the inner and outer metal skins.

Fan maintenance interrupts the entire cleanroom supply system.Multi-fan arrays can provide staged capacity and allow one fan position to be isolated for service.

일반적인 응용 프로그램

Pharmaceutical cleanroom HVAC plantsBiotechnology production suites의료기기 제조Electronics cleanroomsLaboratory air-treatment systems

기술 매개변수

Typical construction ranges for a configurable cleanroom modular air-handling unit are listed below.

핵심 재료	Rigid polyurethane foam or high-density mineral-wool insulation within double-skin casing panels
패널 두께	50–70 mm insulated double-skin casing
유효 폭	1000–4000 mm nominal casing width
최대 길이	Up to 12000 mm assembled length using bolted shipping sections
강철 면면 두께	0.5–1.0 mm inner and outer sheet, selected by casing duty
코어 밀도	40–45 kg/m³ polyurethane or 80–120 kg/m³ mineral wool
열전도도 (Thermal Conductivity)	0.022–0.040 W/(m·K), depending on insulation material
표면 마무리	Powder-coated galvanized outer skin with galvanized or 304 stainless-steel cleanable inner skin
접합 유형	Thermal-break aluminum frame with compression-gasketed panel and block joints
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Chilled-water, hot-water, steam or DX coilsPlug-fan array or single EC fan sectionBag, compact and terminal filter stagesHumidifier, dehumidifier and heat-recovery modules

Planning a Modular Air Handling Unit specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.