Complete water leak detection kit with white controller and coiled white-yellow sensing cable

Controle de sala limpa e sistemas de monitoramento ambiental

Sensor de vazamento de água

A supervised leak sensor that detects conductive liquid along a cable or zone probe near cleanroom utilities and reports an alarm before water spreads.

Sensing Cable or Zone Probe
Supervised Circuit Integrity
Fast Local Alarm
BMS Relay Output

Solicite um orçamento. Browse produtos

Introdução do produto

The water leak detection sensor monitors the electrical condition of a floor cable, rope sensor or compact zone probe. Contact with conductive liquid changes the sensing circuit and activates the local controller, while supervision identifies cable breaks or disconnected probes separately. The sensing element can be routed around AHU drain pans, humidifiers, chilled-water lines and raised-floor utility paths. Relay or network output sends leak and trouble states to the BMS so response can begin before water reaches clean finishes or sensitive equipment.

Características-chave

Flexible sensing cable follows equipment perimeters and long utility routes.

Circuit supervision distinguishes a leak alarm from a broken or disconnected sensor.

Resettable sensing elements can return to service after cleaning and drying.

Separate relay or network states report leak, cable fault and controller health.

Preocupações do produto do cliente

A useful leak system must cover the likely water path, remain serviceable and signal cable damage before an actual leak occurs.

A point probe detects water only after it reaches one small location.A sensing cable follows the full perimeter or lowest likely flow path.

A disconnected cable leaves the area unprotected without warning.Supervised end-of-line monitoring creates a distinct trouble alarm for circuit loss.

The sensor must be discarded after a minor clean-water leak.A resettable cable can be wiped, dried and returned to monitoring service.

Water spreads under equipment before staff find the source zone.Zoned circuits and clear controller labels narrow the response area quickly.

Aplicações típicas

AHU and humidifier roomsCleanroom utility chasesRaised-floor process areasChilled-water and drain lines

Parâmetros técnicos

Typical construction values for a cleanroom water leak sensor and zone controller are listed below.

Material principal	Conductive polymer sensing cable with fluoropolymer braid and polycarbonate zone controller
Painel de espessura	35-70 mm controller depth
Largura efetiva	90-160 mm controller width
Comprimento máximo	Sensing cable zones up to 30000 mm
Aço enfrentando espessura	0-1.0 mm; optional stainless mounting plate
Densidade Core	1700-2200 kg/m³ for fluoropolymer sensing-cable materials
Condutividade térmica	0.20-0.30 W/(m·K) for fluoropolymer cable insulation
Superfície acabado	White controller with blue status labels and white-yellow braided sensing cable
Tipo conjunto	Supervised quick-connect sensing cable with end terminator and removable alarm terminals
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Zone cable or point probeMultiple sensing zonesLeak and trouble relaysModbus or BACnet gateway

Planning a Water Leak Sensor specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe