Complete water leak detection kit with white controller and coiled white-yellow sensing cable

クリーンルーム管理 · 環境モニタリングシステム

水漏れセンサー

A supervised leak sensor that detects conductive liquid along a cable or zone probe near cleanroom utilities and reports an alarm before water spreads.

Sensing Cable or Zone Probe
Supervised Circuit Integrity
Fast Local Alarm
BMS Relay Output

見積もりリクエスト製品案内

商品紹介

The water leak detection sensor monitors the electrical condition of a floor cable, rope sensor or compact zone probe. Contact with conductive liquid changes the sensing circuit and activates the local controller, while supervision identifies cable breaks or disconnected probes separately. The sensing element can be routed around AHU drain pans, humidifiers, chilled-water lines and raised-floor utility paths. Relay or network output sends leak and trouble states to the BMS so response can begin before water reaches clean finishes or sensitive equipment.

主要な特徴

Flexible sensing cable follows equipment perimeters and long utility routes.

Circuit supervision distinguishes a leak alarm from a broken or disconnected sensor.

Resettable sensing elements can return to service after cleaning and drying.

Separate relay or network states report leak, cable fault and controller health.

お客様の製品に関する懸念事項

A useful leak system must cover the likely water path, remain serviceable and signal cable damage before an actual leak occurs.

A point probe detects water only after it reaches one small location.A sensing cable follows the full perimeter or lowest likely flow path.

A disconnected cable leaves the area unprotected without warning.Supervised end-of-line monitoring creates a distinct trouble alarm for circuit loss.

The sensor must be discarded after a minor clean-water leak.A resettable cable can be wiped, dried and returned to monitoring service.

Water spreads under equipment before staff find the source zone.Zoned circuits and clear controller labels narrow the response area quickly.

典型的な用途

AHU and humidifier roomsCleanroom utility chasesRaised-floor process areasChilled-water and drain lines

技術的なパラメータ

Typical construction values for a cleanroom water leak sensor and zone controller are listed below.

コア材料	Conductive polymer sensing cable with fluoropolymer braid and polycarbonate zone controller
パネルの厚さ	35-70 mm controller depth
有効幅	90-160 mm controller width
最大長さ	Sensing cable zones up to 30000 mm
鋼鉄の厚さを直面する	0-1.0 mm; optional stainless mounting plate
コア密度	1700-2200 kg/m³ for fluoropolymer sensing-cable materials
熱伝導率	0.20-0.30 W/(m·K) for fluoropolymer cable insulation
表面仕上げ	White controller with blue status labels and white-yellow braided sensing cable
ジョイントタイプ	Supervised quick-connect sensing cable with end terminator and removable alarm terminals
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Zone cable or point probeMultiple sensing zonesLeak and trouble relaysModbus or BACnet gateway

Planning a Water Leak Sensor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する