Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Filtro de ar molecular VOC
A high-capacity activated-carbon cell designed to adsorb volatile organic compounds and solvent vapours from process, make-up or recirculated air.
- High-Surface-Area Carbon
- VOC Adsorption
- Low Bypass Construction
- Replaceable Media Cell
Introdução do produto
This VOC filter contains virgin coconut-shell or coal-based activated carbon selected for non-polar organic vapours. The adsorbent is packed into a rigid V-bank or box cell to combine a large media mass with practical airflow. Internal screens and seals eliminate edge bypass and limit carbon fines. It is commonly preceded by particulate filtration so dust does not block the carbon pores, and it may be followed by a final filter where product cleanliness is critical.
Características-chave
A deep or V-bank bed carries substantially more adsorbent than a thin carbon pad.
Internal media screens reduce carbon migration into the downstream system.
Gasketed frame interfaces suit front- or side-access filter housings.
Preocupações do produto do cliente
Low-boiling solvents and process VOCs pass through particle filters and may contaminate products or create persistent odour.
A carbon-coated pad saturates quickly during routine solvent use.A deep bed increases usable carbon mass and extends the adsorption interval.
High humidity occupies adsorption sites and shortens filter life.Media grade and airflow residence time are selected for the expected humidity and VOC family.
Dust loads the carbon surface before it can adsorb vapour.An upstream fine-particle stage protects pores and preserves molecular capacity.
Unsealed filter edges let untreated air bypass the media bed.Continuous gaskets and bonded internal joints close the frame-to-housing path.
Aplicações típicas
Solvent-handling cleanroomsPrinting and coating areasLaboratory recirculation airElectronics production make-up airOdour control in occupied technical spaces
Parâmetros técnicos
Common construction ranges for a deep-bed VOC molecular filter are listed below.
| Material principal | Virgin activated carbon selected for hydrocarbons, solvents and broad-spectrum VOC adsorption |
|---|---|
| Painel de espessura | Profundidade total do filtro 150 - 292 mm |
| Largura efetiva | 305 - 610 mm Largura nominal da face |
| Comprimento máximo | Up to 762 mm nominal face height |
| Aço enfrentando espessura | 0.7–1.2 mm galvanized or stainless-steel frame and retainers |
| Densidade Core | 420–560 kg/m³ packed activated-carbon bulk density |
| Condutividade térmica | 0.09–0.18 W/(m·K) for packed activated carbon |
| Superfície acabado | Galvanized steel, brushed stainless steel or low-emission powder coat |
| Tipo conjunto | Sealed deep-bed or V-bank cell with continuous polyurethane or neoprene gasket |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Coconut-shell or coal-based carbonBox or V-bank geometryScrim-controlled low-dust constructionHeader or box-frame mounting
Planning a VOC Molecular Air Filter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
