상품 소개
This VOC filter contains virgin coconut-shell or coal-based activated carbon selected for non-polar organic vapours. The adsorbent is packed into a rigid V-bank or box cell to combine a large media mass with practical airflow. Internal screens and seals eliminate edge bypass and limit carbon fines. It is commonly preceded by particulate filtration so dust does not block the carbon pores, and it may be followed by a final filter where product cleanliness is critical.
주요 기능
A deep or V-bank bed carries substantially more adsorbent than a thin carbon pad.
Internal media screens reduce carbon migration into the downstream system.
Gasketed frame interfaces suit front- or side-access filter housings.
고객 제품 관심사
Low-boiling solvents and process VOCs pass through particle filters and may contaminate products or create persistent odour.
A carbon-coated pad saturates quickly during routine solvent use.A deep bed increases usable carbon mass and extends the adsorption interval.
High humidity occupies adsorption sites and shortens filter life.Media grade and airflow residence time are selected for the expected humidity and VOC family.
Dust loads the carbon surface before it can adsorb vapour.An upstream fine-particle stage protects pores and preserves molecular capacity.
Unsealed filter edges let untreated air bypass the media bed.Continuous gaskets and bonded internal joints close the frame-to-housing path.
일반적인 응용 프로그램
Solvent-handling cleanroomsPrinting and coating areasLaboratory recirculation airElectronics production make-up airOdour control in occupied technical spaces
기술 매개변수
Common construction ranges for a deep-bed VOC molecular filter are listed below.
| 핵심 재료 | Virgin activated carbon selected for hydrocarbons, solvents and broad-spectrum VOC adsorption |
|---|---|
| 패널 두께 | 150–292 mm overall filter depth |
| 유효 폭 | 305 - 610 mm 공칭 면 너비 |
| 최대 길이 | Up to 762 mm nominal face height |
| 강철 면면 두께 | 0.7–1.2 mm galvanized or stainless-steel frame and retainers |
| 코어 밀도 | 420–560 kg/m³ packed activated-carbon bulk density |
| 열전도도 (Thermal Conductivity) | 0.09–0.18 W/(m·K) for packed activated carbon |
| 표면 마무리 | Galvanized steel, brushed stainless steel or low-emission powder coat |
| 접합 유형 | Sealed deep-bed or V-bank cell with continuous polyurethane or neoprene gasket |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Coconut-shell or coal-based carbonBox or V-bank geometryScrim-controlled low-dust constructionHeader or box-frame mounting
Planning a VOC Molecular Air Filter specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어