English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
VOC فلتر الهواء الجزيئي
A high-capacity activated-carbon cell designed to adsorb volatile organic compounds and solvent vapours from process, make-up or recirculated air.
- High-Surface-Area Carbon
- VOC Adsorption
- Low Bypass Construction
- Replaceable Media Cell
مقدمة المنتج
This VOC filter contains virgin coconut-shell or coal-based activated carbon selected for non-polar organic vapours. The adsorbent is packed into a rigid V-bank or box cell to combine a large media mass with practical airflow. Internal screens and seals eliminate edge bypass and limit carbon fines. It is commonly preceded by particulate filtration so dust does not block the carbon pores, and it may be followed by a final filter where product cleanliness is critical.
الخصائص الرئيسية
A deep or V-bank bed carries substantially more adsorbent than a thin carbon pad.
Internal media screens reduce carbon migration into the downstream system.
Gasketed frame interfaces suit front- or side-access filter housings.
مخاوف المنتج للعملاء
Low-boiling solvents and process VOCs pass through particle filters and may contaminate products or create persistent odour.
A carbon-coated pad saturates quickly during routine solvent use.A deep bed increases usable carbon mass and extends the adsorption interval.
High humidity occupies adsorption sites and shortens filter life.Media grade and airflow residence time are selected for the expected humidity and VOC family.
Dust loads the carbon surface before it can adsorb vapour.An upstream fine-particle stage protects pores and preserves molecular capacity.
Unsealed filter edges let untreated air bypass the media bed.Continuous gaskets and bonded internal joints close the frame-to-housing path.
تطبيقات نموذجية
Solvent-handling cleanroomsPrinting and coating areasLaboratory recirculation airElectronics production make-up airOdour control in occupied technical spaces
المعلمات الفنية
Common construction ranges for a deep-bed VOC molecular filter are listed below.
| المواد الأساسية | Virgin activated carbon selected for hydrocarbons, solvents and broad-spectrum VOC adsorption |
|---|---|
| سمك اللوحة | 150–292 mm overall filter depth |
| العرض الفعال | 305-610 مم عرض الوجه الاسمي |
| الحد الأقصى الطول | Up to 762 mm nominal face height |
| الصلب يواجه سمك | 0.7–1.2 mm galvanized or stainless-steel frame and retainers |
| الكثافة الأساسية | 420–560 kg/m³ packed activated-carbon bulk density |
| الموصلية الحرارية | 0.09–0.18 W/(m·K) for packed activated carbon |
| إنهاء السطح | Galvanized steel, brushed stainless steel or low-emission powder coat |
| نوع المشترك | Sealed deep-bed or V-bank cell with continuous polyurethane or neoprene gasket |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Coconut-shell or coal-based carbonBox or V-bank geometryScrim-controlled low-dust constructionHeader or box-frame mounting
Planning a VOC Molecular Air Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
