Sistemas de Utilidade de Cleanroom
UV esterilizador de água
An inline ultraviolet reactor that applies a controlled germicidal UV dose to process water without adding a chemical disinfectant.
- Chemical-free UV treatment
- 316L hygienic reactor
- Real-time lamp monitoring
Introdução do produto
The UV water sterilizer directs water through a polished stainless chamber surrounding a protected ultraviolet lamp. A matched power supply, UV sensor and operating controller help maintain the selected treatment dose while sanitary connections integrate the unit into purified-water or process-water piping.
Características-chave
Quartz lamp sleeve
UV intensity sensor
Lamp operating-hour monitoring
Sanitary clamp process ports
Separate electrical control cabinet
Low-pressure or medium-pressure lamp selection
Vertical or horizontal installation
Preocupações do produto do cliente
Effective UV treatment requires adequate water transmittance, verified lamp output, correct hydraulic exposure and routine sleeve maintenance.
Lamp ageing reduces delivered doseMonitor UV intensity and operating hours and replace lamps at the planned service interval.
Mineral film blocks UV transmissionInspect and clean the quartz sleeve according to feed-water quality and runtime.
High flow shortens exposure timeSize the chamber and lamp power for peak flow and measured UV transmittance.
Operators cannot verify treatment statusUse continuous UV output, lamp-fault and flow-interlock signals at the controller.
Aplicações típicas
Purified Water distribution loopsWFI loop microbial controlRO pretreatment biofouling controlProcess-water disinfectionFood and beverage ingredient water
Parâmetros técnicos
Reactor size, lamp technology, electrical power and monitoring range are selected from peak flow, UV transmittance and target dose.
| Material principal | 316L stainless steel reactor with fused-quartz lamp sleeve |
|---|---|
| Painel de espessura | Reactor wall typically 2.0–6.0 mm |
| Largura efetiva | Reactor diameter typically 100–600 mm |
| Comprimento máximo | Complete reactor length typically up to 2200 mm |
| Aço enfrentando espessura | Control enclosure sheet typically 1.2–2.0 mm |
| Densidade Core | 316L stainless steel density approximately 8000 kg/m³ |
| Condutividade térmica | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Superfície acabado | Electropolished or mechanically polished product-contact chamber with satin external finish |
| Tipo conjunto | Sanitary clamp process ports with sealed quartz sleeve and threaded sensor/service ports |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Low- or medium-pressure UV lampAutomatic sleeve wipingUV transmittance sensorFlow meter interlockRemote status communicationVertical mountingAlternative control enclosure rating
Planning a UV Water Sterilizer specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã