Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de utilidad de Cleanroom
UV esterilizador de agua por
An inline ultraviolet reactor that applies a controlled germicidal UV dose to process water without adding a chemical disinfectant.
- Chemical-free UV treatment
- 316L hygienic reactor
- Real-time lamp monitoring
Introducción del producto
The UV water sterilizer directs water through a polished stainless chamber surrounding a protected ultraviolet lamp. A matched power supply, UV sensor and operating controller help maintain the selected treatment dose while sanitary connections integrate the unit into purified-water or process-water piping.
Características clave
Quartz lamp sleeve
UV intensity sensor
Lamp operating-hour monitoring
Sanitary clamp process ports
Separate electrical control cabinet
Low-pressure or medium-pressure lamp selection
Vertical or horizontal installation
Preocupaciones del producto del cliente
Effective UV treatment requires adequate water transmittance, verified lamp output, correct hydraulic exposure and routine sleeve maintenance.
Lamp ageing reduces delivered doseMonitor UV intensity and operating hours and replace lamps at the planned service interval.
Mineral film blocks UV transmissionInspect and clean the quartz sleeve according to feed-water quality and runtime.
High flow shortens exposure timeSize the chamber and lamp power for peak flow and measured UV transmittance.
Operators cannot verify treatment statusUse continuous UV output, lamp-fault and flow-interlock signals at the controller.
Aplicaciones típicas
Purified Water distribution loopsWFI loop microbial controlRO pretreatment biofouling controlProcess-water disinfectionFood and beverage ingredient water
Parámetros técnicos
Reactor size, lamp technology, electrical power and monitoring range are selected from peak flow, UV transmittance and target dose.
| Materiales Core | 316L stainless steel reactor with fused-quartz lamp sleeve |
|---|---|
| Panel de espesor | Reactor wall typically 2.0–6.0 mm |
| Ancho efectivo | Reactor diameter typically 100–600 mm |
| Longitud máxima | Complete reactor length typically up to 2200 mm |
| Acero frente a espesor | Control enclosure sheet typically 1.2–2.0 mm |
| Densidad Core | 316L stainless steel density approximately 8000 kg/m³ |
| Conductividad térmica | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| Superficie acabada | Electropolished or mechanically polished product-contact chamber with satin external finish |
| Tipo conjunto | Sanitary clamp process ports with sealed quartz sleeve and threaded sensor/service ports |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Low- or medium-pressure UV lampAutomatic sleeve wipingUV transmittance sensorFlow meter interlockRemote status communicationVertical mountingAlternative control enclosure rating
Planning a UV Water Sterilizer specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
