UV water sterilizer three-quarter view with stainless reactor and controller

クリーンルームユーティリティシステム

UV 水の滅菌器

An inline ultraviolet reactor that applies a controlled germicidal UV dose to process water without adding a chemical disinfectant.

Chemical-free UV treatment
316L hygienic reactor
Real-time lamp monitoring

見積もりリクエスト製品案内

商品紹介

The UV water sterilizer directs water through a polished stainless chamber surrounding a protected ultraviolet lamp. A matched power supply, UV sensor and operating controller help maintain the selected treatment dose while sanitary connections integrate the unit into purified-water or process-water piping.

主要な特徴

316L inline treatment chamber

Quartz lamp sleeve

UV intensity sensor

Lamp operating-hour monitoring

Sanitary clamp process ports

Separate electrical control cabinet

Low-pressure or medium-pressure lamp selection

Vertical or horizontal installation

お客様の製品に関する懸念事項

Effective UV treatment requires adequate water transmittance, verified lamp output, correct hydraulic exposure and routine sleeve maintenance.

Lamp ageing reduces delivered doseMonitor UV intensity and operating hours and replace lamps at the planned service interval.

Mineral film blocks UV transmissionInspect and clean the quartz sleeve according to feed-water quality and runtime.

High flow shortens exposure timeSize the chamber and lamp power for peak flow and measured UV transmittance.

Operators cannot verify treatment statusUse continuous UV output, lamp-fault and flow-interlock signals at the controller.

典型的な用途

Purified Water distribution loopsWFI loop microbial controlRO pretreatment biofouling controlProcess-water disinfectionFood and beverage ingredient water

技術的なパラメータ

Reactor size, lamp technology, electrical power and monitoring range are selected from peak flow, UV transmittance and target dose.

コア材料	316L stainless steel reactor with fused-quartz lamp sleeve
パネルの厚さ	Reactor wall typically 2.0–6.0 mm
有効幅	Reactor diameter typically 100–600 mm
最大長さ	Complete reactor length typically up to 2200 mm
鋼鉄の厚さを直面する	Control enclosure sheet typically 1.2–2.0 mm
コア密度	316L stainless steel density approximately 8000 kg/m³
熱伝導率	316L stainless steel approximately 15 W/(m·K) at ambient temperature
表面仕上げ	Electropolished or mechanically polished product-contact chamber with satin external finish
ジョイントタイプ	Sanitary clamp process ports with sealed quartz sleeve and threaded sensor/service ports
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Low- or medium-pressure UV lampAutomatic sleeve wipingUV transmittance sensorFlow meter interlockRemote status communicationVertical mountingAlternative control enclosure rating

Planning a UV Water Sterilizer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する