Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes utilitaires Cleanroom
Stérilisateur UV Water
An inline ultraviolet reactor that applies a controlled germicidal UV dose to process water without adding a chemical disinfectant.
- Chemical-free UV treatment
- 316L hygienic reactor
- Real-time lamp monitoring
Introduction de produit
The UV water sterilizer directs water through a polished stainless chamber surrounding a protected ultraviolet lamp. A matched power supply, UV sensor and operating controller help maintain the selected treatment dose while sanitary connections integrate the unit into purified-water or process-water piping.
Key Features
Quartz lamp sleeve
UV intensity sensor
Lamp operating-hour monitoring
Sanitary clamp process ports
Separate electrical control cabinet
Low-pressure or medium-pressure lamp selection
Vertical or horizontal installation
Préoccupations du client produit
Effective UV treatment requires adequate water transmittance, verified lamp output, correct hydraulic exposure and routine sleeve maintenance.
Lamp ageing reduces delivered doseMonitor UV intensity and operating hours and replace lamps at the planned service interval.
Mineral film blocks UV transmissionInspect and clean the quartz sleeve according to feed-water quality and runtime.
High flow shortens exposure timeSize the chamber and lamp power for peak flow and measured UV transmittance.
Operators cannot verify treatment statusUse continuous UV output, lamp-fault and flow-interlock signals at the controller.
Les applications typiques
Purified Water distribution loopsWFI loop microbial controlRO pretreatment biofouling controlProcess-water disinfectionFood and beverage ingredient water
Paramètres techniques
Reactor size, lamp technology, electrical power and monitoring range are selected from peak flow, UV transmittance and target dose.
| Matériaux de base | 316L stainless steel reactor with fused-quartz lamp sleeve |
|---|---|
| Panneau épaisseur | Reactor wall typically 2.0–6.0 mm |
| Largeur effective | Reactor diameter typically 100–600 mm |
| Longueur maximale | Complete reactor length typically up to 2200 mm |
| Acier face épaisseur | Control enclosure sheet typically 1.2–2.0 mm |
| Densité Core | 316L stainless steel density approximately 8000 kg/m³ |
| Conductivité thermique | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| surface finie | Electropolished or mechanically polished product-contact chamber with satin external finish |
| Type joint | Sanitary clamp process ports with sealed quartz sleeve and threaded sensor/service ports |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Low- or medium-pressure UV lampAutomatic sleeve wipingUV transmittance sensorFlow meter interlockRemote status communicationVertical mountingAlternative control enclosure rating
Planning a UV Water Sterilizer specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
