Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Duas pessoas chuveiro de ar limpo
A widened personnel air shower that cleans two gowned operators per cycle through distributed filtered-air nozzles and split low-level returns.
- Two-Operator Capacity
- Expanded Nozzle Zones
- Wide Controlled Doorway
- Split Return Collection
Introdução do produto
This two-person air shower enlarges the usable chamber and scales the airflow system rather than merely widening a single-person shell. Multiple nozzle zones correspond to two standing positions, and split returns collect contamination from both portions of the floor area. It suits shift entries where paired traffic is common but a long walk-through tunnel is unnecessary.
Características-chave
Additional outlet rows extend cleaning air across both occupied positions.
Multiple fan sections support airflow delivery over the enlarged nozzle array.
Split return grilles shorten the collection path from each standing zone.
Reinforced door framing supports a wider personnel opening.
Preocupações do produto do cliente
Paired entry must raise throughput without allowing one operator to block the other from the cleaning airflow.
Two occupants can crowd together and shield garment surfaces.A widened floor plan and distributed nozzles establish two usable cleaning positions.
A single blower can lose pressure as chamber width and nozzle count increase.Multiple centrifugal blower sections divide the demand across the enlarged air circuit.
A broad door leaf can lose alignment after repeated cycles.Reinforced jambs and adjustable hardware maintain the relationship between the door and interlock.
The larger particle load overwhelms a small return area.Separate lower return sections offer greater collection area on both sides of the chamber.
Aplicações típicas
Pharmaceutical shift entrancesBattery production clean areasMedical consumables manufacturingFood-packaging hygiene zones
Parâmetros técnicos
Typical ranges for a two-occupant cleanroom air shower are shown below.
| Material principal | Polyurethane-insulated steel enclosure with multiple centrifugal blowers, stainless nozzles, prefilters and H13 HEPA filters |
|---|---|
| Painel de espessura | 50-60 mm insulated chamber panels |
| Largura efetiva | 1000-1400 mm clear two-person passage width |
| Comprimento máximo | Up to 2000 mm cleaning-zone length |
| Aço enfrentando espessura | 1.0-1.2 mm enclosure facing with reinforced door jambs |
| Densidade Core | 40-45 kg/m³ rigid polyurethane insulation |
| Condutividade térmica | 0.023-0.029 W/(m·K) for the closed-cell panel core |
| Superfície acabado | White cleanroom powder coat with polished stainless jet nozzles |
| Tipo conjunto | Reinforced flush panel joints with a gasketed wide-door frame and electromagnetic interlock |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
24-32 directional nozzlesSingle or double-leaf doorsIndependent blower-filter circuitsOccupancy and voice-prompt display
Planning a Two-Person Cleanroom Air Shower specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
