Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Double-personne salle blanche douche à air
A widened personnel air shower that cleans two gowned operators per cycle through distributed filtered-air nozzles and split low-level returns.
- Two-Operator Capacity
- Expanded Nozzle Zones
- Wide Controlled Doorway
- Split Return Collection
Introduction de produit
This two-person air shower enlarges the usable chamber and scales the airflow system rather than merely widening a single-person shell. Multiple nozzle zones correspond to two standing positions, and split returns collect contamination from both portions of the floor area. It suits shift entries where paired traffic is common but a long walk-through tunnel is unnecessary.
Key Features
Additional outlet rows extend cleaning air across both occupied positions.
Multiple fan sections support airflow delivery over the enlarged nozzle array.
Split return grilles shorten the collection path from each standing zone.
Reinforced door framing supports a wider personnel opening.
Préoccupations du client produit
Paired entry must raise throughput without allowing one operator to block the other from the cleaning airflow.
Two occupants can crowd together and shield garment surfaces.A widened floor plan and distributed nozzles establish two usable cleaning positions.
A single blower can lose pressure as chamber width and nozzle count increase.Multiple centrifugal blower sections divide the demand across the enlarged air circuit.
A broad door leaf can lose alignment after repeated cycles.Reinforced jambs and adjustable hardware maintain the relationship between the door and interlock.
The larger particle load overwhelms a small return area.Separate lower return sections offer greater collection area on both sides of the chamber.
Les applications typiques
Pharmaceutical shift entrancesBattery production clean areasMedical consumables manufacturingFood-packaging hygiene zones
Paramètres techniques
Typical ranges for a two-occupant cleanroom air shower are shown below.
| Matériaux de base | Polyurethane-insulated steel enclosure with multiple centrifugal blowers, stainless nozzles, prefilters and H13 HEPA filters |
|---|---|
| Panneau épaisseur | 50-60 mm insulated chamber panels |
| Largeur effective | 1000-1400 mm clear two-person passage width |
| Longueur maximale | Up to 2000 mm cleaning-zone length |
| Acier face épaisseur | 1.0-1.2 mm enclosure facing with reinforced door jambs |
| Densité Core | 40-45 kg/m³ rigid polyurethane insulation |
| Conductivité thermique | 0.023-0.029 W/(m·K) for the closed-cell panel core |
| surface finie | White cleanroom powder coat with polished stainless jet nozzles |
| Type joint | Reinforced flush panel joints with a gasketed wide-door frame and electromagnetic interlock |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
24-32 directional nozzlesSingle or double-leaf doorsIndependent blower-filter circuitsOccupancy and voice-prompt display
Planning a Two-Person Cleanroom Air Shower specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
