クリーンルーム機器と無菌施設の必需品のワンストップサプライヤー国際プロジェクト支援
Open mobile navigationClose mobile navigation
ホーム / 製品 / 人員 · 材料の汚染除去設備 / Two-Person Cleanroom Air Shower
人員 · 材料の汚染除去設備

二人用クリーンルームエアシャワー

A widened personnel air shower that cleans two gowned operators per cycle through distributed filtered-air nozzles and split low-level returns.
  • Two-Operator Capacity
  • Expanded Nozzle Zones
  • Wide Controlled Doorway
  • Split Return Collection
見積もりリクエスト 製品案内

商品紹介

This two-person air shower enlarges the usable chamber and scales the airflow system rather than merely widening a single-person shell. Multiple nozzle zones correspond to two standing positions, and split returns collect contamination from both portions of the floor area. It suits shift entries where paired traffic is common but a long walk-through tunnel is unnecessary.

主要な特徴

A wider clear floor gives two gowned operators space to stand apart.

Additional outlet rows extend cleaning air across both occupied positions.

Multiple fan sections support airflow delivery over the enlarged nozzle array.

Split return grilles shorten the collection path from each standing zone.

Reinforced door framing supports a wider personnel opening.

お客様の製品に関する懸念事項

Paired entry must raise throughput without allowing one operator to block the other from the cleaning airflow.

Two occupants can crowd together and shield garment surfaces.A widened floor plan and distributed nozzles establish two usable cleaning positions.
A single blower can lose pressure as chamber width and nozzle count increase.Multiple centrifugal blower sections divide the demand across the enlarged air circuit.
A broad door leaf can lose alignment after repeated cycles.Reinforced jambs and adjustable hardware maintain the relationship between the door and interlock.
The larger particle load overwhelms a small return area.Separate lower return sections offer greater collection area on both sides of the chamber.

典型的な用途

Pharmaceutical shift entrancesBattery production clean areasMedical consumables manufacturingFood-packaging hygiene zones

技術的なパラメータ

Typical ranges for a two-occupant cleanroom air shower are shown below.

コア材料Polyurethane-insulated steel enclosure with multiple centrifugal blowers, stainless nozzles, prefilters and H13 HEPA filters
パネルの厚さ50-60 mm insulated chamber panels
有効幅1000-1400 mm clear two-person passage width
最大長さUp to 2000 mm cleaning-zone length
鋼鉄の厚さを直面する1.0-1.2 mm enclosure facing with reinforced door jambs
コア密度40-45 kg/m³ rigid polyurethane insulation
熱伝導率0.023-0.029 W/(m·K) for the closed-cell panel core
表面仕上げWhite cleanroom powder coat with polished stainless jet nozzles
ジョイントタイプReinforced flush panel joints with a gasketed wide-door frame and electromagnetic interlock
カスタマイズ意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

24-32 directional nozzlesSingle or double-leaf doorsIndependent blower-filter circuitsOccupancy and voice-prompt display

Planning a Two-Person Cleanroom Air Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する
メール送信 WhatsApp WeChat

ホーム

製品

ニュース

会社概要

お問い合わせ