Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Controle de sala limpa e sistemas de monitoramento ambiental
Sensor de gás tóxico
A fixed electrochemical gas detector configured for a selected toxic gas and installed near credible release points in cleanroom support or process areas.
- Gas-Specific Sensor Cartridge
- Local and Remote Alarms
- Replaceable Electrochemical Cell
- Protected Diffusion Inlet
Introdução do produto
The fixed toxic gas detector uses a gas-specific electrochemical cartridge selected for the target hazard, such as ammonia, chlorine, hydrogen sulfide or carbon monoxide. Ambient gas diffuses through a hydrophobic filter to the electrodes, generating a concentration-proportional signal. The transmitter provides local indication, configurable alarm relays and a standard analog or digital output. Sensor cartridges can be replaced independently of the housing, and optional remote sensing heads place the element closer to the expected release location.
Características-chave
A hydrophobic diffusion barrier protects the cell from droplets while admitting gas.
Independent warning and alarm thresholds operate local indicators and remote interlocks.
Replaceable cartridges and remote-head options simplify lifecycle and location changes.
Preocupações do produto do cliente
Toxic gas monitoring must match the actual gas, likely release behavior and potential sensor cross-sensitivities rather than using one generic detector.
A detector selected for the wrong gas has weak or misleading response.A gas-specific cartridge is chosen for the target compound and expected concentration range.
The detector is mounted where air movement carries the gas away from it.Release analysis and gas-density behavior determine sensor position near credible accumulation paths.
Cross-sensitive vapors trigger nuisance alarms during cleaning.Gas-specific selection, alarm delay and known interference review reduce avoidable responses.
An expired cell remains installed because replacement requires rewiring.A plug-in sensor cartridge can be exchanged while retaining the mounted transmitter and field cable.
Aplicações típicas
Process gas cabinetsChemical storage support roomsSterilant handling areasClean utility equipment rooms
Parâmetros técnicos
Typical construction values for a fixed cleanroom toxic gas detector are shown below.
| Material principal | Gas-specific electrochemical cartridge in powder-coated aluminum transmitter with stainless steel sensor guard |
|---|---|
| Painel de espessura | 60-110 mm detector depth |
| Largura efetiva | 120-200 mm housing width |
| Comprimento máximo | Up to 280 mm detector height |
| Aço enfrentando espessura | 0.5-1.0 mm stainless sensor guard and mounting plate |
| Densidade Core | 2650-2750 kg/m³ for aluminum transmitter body |
| Condutividade térmica | 150-220 W/(m·K) for aluminum enclosure material |
| Superfície acabado | White or light-gray powder-coated aluminum body with gas-specific color label, black display and red alarm indicator |
| Tipo conjunto | Plug-in diffusion cartridge with sealed cable entry and removable alarm-output terminal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Gas-specific cartridge selectionLocal display and sounderRemote sensing headAnalog, relay or digital outputs
Planning a Toxic Gas Sensor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
