Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Control de salas limpias y sistemas de monitoreo ambiental
Sensor de gases tóxicos
A fixed electrochemical gas detector configured for a selected toxic gas and installed near credible release points in cleanroom support or process areas.
- Gas-Specific Sensor Cartridge
- Local and Remote Alarms
- Replaceable Electrochemical Cell
- Protected Diffusion Inlet
Introducción del producto
The fixed toxic gas detector uses a gas-specific electrochemical cartridge selected for the target hazard, such as ammonia, chlorine, hydrogen sulfide or carbon monoxide. Ambient gas diffuses through a hydrophobic filter to the electrodes, generating a concentration-proportional signal. The transmitter provides local indication, configurable alarm relays and a standard analog or digital output. Sensor cartridges can be replaced independently of the housing, and optional remote sensing heads place the element closer to the expected release location.
Características clave
A hydrophobic diffusion barrier protects the cell from droplets while admitting gas.
Independent warning and alarm thresholds operate local indicators and remote interlocks.
Replaceable cartridges and remote-head options simplify lifecycle and location changes.
Preocupaciones del producto del cliente
Toxic gas monitoring must match the actual gas, likely release behavior and potential sensor cross-sensitivities rather than using one generic detector.
A detector selected for the wrong gas has weak or misleading response.A gas-specific cartridge is chosen for the target compound and expected concentration range.
The detector is mounted where air movement carries the gas away from it.Release analysis and gas-density behavior determine sensor position near credible accumulation paths.
Cross-sensitive vapors trigger nuisance alarms during cleaning.Gas-specific selection, alarm delay and known interference review reduce avoidable responses.
An expired cell remains installed because replacement requires rewiring.A plug-in sensor cartridge can be exchanged while retaining the mounted transmitter and field cable.
Aplicaciones típicas
Process gas cabinetsChemical storage support roomsSterilant handling areasClean utility equipment rooms
Parámetros técnicos
Typical construction values for a fixed cleanroom toxic gas detector are shown below.
| Materiales Core | Gas-specific electrochemical cartridge in powder-coated aluminum transmitter with stainless steel sensor guard |
|---|---|
| Panel de espesor | 60-110 mm detector depth |
| Ancho efectivo | 120-200 mm housing width |
| Longitud máxima | Up to 280 mm detector height |
| Acero frente a espesor | 0.5-1.0 mm stainless sensor guard and mounting plate |
| Densidad Core | 2650-2750 kg/m³ for aluminum transmitter body |
| Conductividad térmica | 150-220 W/(m·K) for aluminum enclosure material |
| Superficie acabada | White or light-gray powder-coated aluminum body with gas-specific color label, black display and red alarm indicator |
| Tipo conjunto | Plug-in diffusion cartridge with sealed cable entry and removable alarm-output terminal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Gas-specific cartridge selectionLocal display and sounderRemote sensing headAnalog, relay or digital outputs
Planning a Toxic Gas Sensor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
