Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistema de piso para sala limpa
Z Revestimento de piso epóxi de filme fino
A roller-applied epoxy coating that seals sound concrete and provides an economical, bright finish for light-duty controlled areas.
- Economical Concrete Sealer
- 0.15–0.40 mm Film
- Roller-Applied Finish
- Easy Routine Cleaning
Introdução do produto
Thin-film epoxy floor coating is a primer-and-topcoat system intended for sound, level concrete exposed mainly to pedestrian use and light wheeled traffic. The low-build resin penetrates and seals the prepared surface, reducing concrete dust and creating a uniform colored finish without the material consumption of a self-leveling screed. It is well suited to clean support rooms and circulation areas where the slab is already flat and heavy impact, deep chemical exposure or crack accommodation are not primary requirements.
Características-chave
A pigmented film increases light reflectance and makes dirt or spills easier to identify during inspection.
Multiple thin coats provide more even coverage and fewer holidays than one overloaded roller pass.
Localized recoating can refresh traffic lanes after cleaning and mechanical surface preparation.
Preocupações do produto do cliente
Light-duty rooms need dust control and washability, but a thick industrial screed may add unnecessary cost and downtime.
Bare concrete releases fine dust into adjacent controlled spaces.A penetrating primer and epoxy finish bind the surface and close exposed cement paste.
Dark or stained slabs make routine housekeeping inspection difficult.A uniform light-colored coating improves visibility of residue, leaks and wear.
A thick self-leveling floor is unnecessary in a pedestrian-only room.The 0.15–0.40 mm coating provides practical protection with lower resin consumption.
Roller marks and patchy gloss make a small clean area look unfinished.Controlled coverage, cross-rolling and a second finish coat produce more consistent color and sheen.
Aplicações típicas
Cleanroom change areasLight-duty laboratoriesUtility corridorsInspection roomsControlled storage rooms
Parâmetros técnicos
Representative construction data for a two- or three-coat thin-film epoxy system are provided below.
| Material principal | Two-part pigmented epoxy coating over a compatible penetrating epoxy primer |
|---|---|
| Painel de espessura | 0.15–0.40 mm total dry film thickness |
| Largura efetiva | Typically 3000–6000 mm roller application bay width |
| Comprimento máximo | Typically up to 25000 mm continuous coated run between slab joints |
| Aço enfrentando espessura | 0 mm; the floor coating contains no steel facing layer |
| Densidade Core | Approximately 1200–1450 kg/m³ for mixed coating resin |
| Condutividade térmica | Typically 0.25–0.38 W/(m·K) for the cured epoxy film |
| Superfície acabado | Smooth gloss or low-sheen roller finish with optional fine anti-slip additive |
| Tipo conjunto | Multi-coat bonded film with cracks repaired before coating and slab movement joints left active |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Two-coat or primer-plus-two-coat buildGloss or low-sheen finishFine slip additive for entrancesColored walkways and line marking
Planning a Thin-Film Epoxy Floor Coating specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
