Light-blue thin-film epoxy floor coating sample in a full three-quarter view

클린룸 바닥 시스템

박막 에폭시 바닥 코팅 (Thin - film epoxy flooring coating)

A roller-applied epoxy coating that seals sound concrete and provides an economical, bright finish for light-duty controlled areas.

Economical Concrete Sealer
0.15–0.40 mm Film
Roller-Applied Finish
Easy Routine Cleaning

견적 요청 제품 찾아보기

상품 소개

Thin-film epoxy floor coating is a primer-and-topcoat system intended for sound, level concrete exposed mainly to pedestrian use and light wheeled traffic. The low-build resin penetrates and seals the prepared surface, reducing concrete dust and creating a uniform colored finish without the material consumption of a self-leveling screed. It is well suited to clean support rooms and circulation areas where the slab is already flat and heavy impact, deep chemical exposure or crack accommodation are not primary requirements.

주요 기능

The roller-applied system seals concrete dust at a lower installed build than a poured resin screed.

A pigmented film increases light reflectance and makes dirt or spills easier to identify during inspection.

Multiple thin coats provide more even coverage and fewer holidays than one overloaded roller pass.

Localized recoating can refresh traffic lanes after cleaning and mechanical surface preparation.

고객 제품 관심사

Light-duty rooms need dust control and washability, but a thick industrial screed may add unnecessary cost and downtime.

Bare concrete releases fine dust into adjacent controlled spaces.A penetrating primer and epoxy finish bind the surface and close exposed cement paste.

Dark or stained slabs make routine housekeeping inspection difficult.A uniform light-colored coating improves visibility of residue, leaks and wear.

A thick self-leveling floor is unnecessary in a pedestrian-only room.The 0.15–0.40 mm coating provides practical protection with lower resin consumption.

Roller marks and patchy gloss make a small clean area look unfinished.Controlled coverage, cross-rolling and a second finish coat produce more consistent color and sheen.

일반적인 응용 프로그램

Cleanroom change areasLight-duty laboratoriesUtility corridorsInspection roomsControlled storage rooms

기술 매개변수

Representative construction data for a two- or three-coat thin-film epoxy system are provided below.

핵심 재료	Two-part pigmented epoxy coating over a compatible penetrating epoxy primer
패널 두께	0.15–0.40 mm total dry film thickness
유효 폭	Typically 3000–6000 mm roller application bay width
최대 길이	Typically up to 25000 mm continuous coated run between slab joints
강철 면면 두께	0 mm; the floor coating contains no steel facing layer
코어 밀도	Approximately 1200–1450 kg/m³ for mixed coating resin
열전도도 (Thermal Conductivity)	Typically 0.25–0.38 W/(m·K) for the cured epoxy film
표면 마무리	Smooth gloss or low-sheen roller finish with optional fine anti-slip additive
접합 유형	Multi-coat bonded film with cracks repaired before coating and slab movement joints left active
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Two-coat or primer-plus-two-coat buildGloss or low-sheen finishFine slip additive for entrancesColored walkways and line marking

Planning a Thin-Film Epoxy Floor Coating specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.