English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
Thin-الفيلم الايبوكسي طلاء الأرضيات
A roller-applied epoxy coating that seals sound concrete and provides an economical, bright finish for light-duty controlled areas.
- Economical Concrete Sealer
- 0.15–0.40 mm Film
- Roller-Applied Finish
- Easy Routine Cleaning
مقدمة المنتج
Thin-film epoxy floor coating is a primer-and-topcoat system intended for sound, level concrete exposed mainly to pedestrian use and light wheeled traffic. The low-build resin penetrates and seals the prepared surface, reducing concrete dust and creating a uniform colored finish without the material consumption of a self-leveling screed. It is well suited to clean support rooms and circulation areas where the slab is already flat and heavy impact, deep chemical exposure or crack accommodation are not primary requirements.
الخصائص الرئيسية
A pigmented film increases light reflectance and makes dirt or spills easier to identify during inspection.
Multiple thin coats provide more even coverage and fewer holidays than one overloaded roller pass.
Localized recoating can refresh traffic lanes after cleaning and mechanical surface preparation.
مخاوف المنتج للعملاء
Light-duty rooms need dust control and washability, but a thick industrial screed may add unnecessary cost and downtime.
Bare concrete releases fine dust into adjacent controlled spaces.A penetrating primer and epoxy finish bind the surface and close exposed cement paste.
Dark or stained slabs make routine housekeeping inspection difficult.A uniform light-colored coating improves visibility of residue, leaks and wear.
A thick self-leveling floor is unnecessary in a pedestrian-only room.The 0.15–0.40 mm coating provides practical protection with lower resin consumption.
Roller marks and patchy gloss make a small clean area look unfinished.Controlled coverage, cross-rolling and a second finish coat produce more consistent color and sheen.
تطبيقات نموذجية
Cleanroom change areasLight-duty laboratoriesUtility corridorsInspection roomsControlled storage rooms
المعلمات الفنية
Representative construction data for a two- or three-coat thin-film epoxy system are provided below.
| المواد الأساسية | Two-part pigmented epoxy coating over a compatible penetrating epoxy primer |
|---|---|
| سمك اللوحة | 0.15–0.40 mm total dry film thickness |
| العرض الفعال | Typically 3000–6000 mm roller application bay width |
| الحد الأقصى الطول | Typically up to 25000 mm continuous coated run between slab joints |
| الصلب يواجه سمك | 0 mm; the floor coating contains no steel facing layer |
| الكثافة الأساسية | Approximately 1200–1450 kg/m³ for mixed coating resin |
| الموصلية الحرارية | Typically 0.25–0.38 W/(m·K) for the cured epoxy film |
| إنهاء السطح | Smooth gloss or low-sheen roller finish with optional fine anti-slip additive |
| نوع المشترك | Multi-coat bonded film with cracks repaired before coating and slab movement joints left active |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Two-coat or primer-plus-two-coat buildGloss or low-sheen finishFine slip additive for entrancesColored walkways and line marking
Planning a Thin-Film Epoxy Floor Coating specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
