Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Z Revestimiento de suelo epoxi de película delgada por
A roller-applied epoxy coating that seals sound concrete and provides an economical, bright finish for light-duty controlled areas.
- Economical Concrete Sealer
- 0.15–0.40 mm Film
- Roller-Applied Finish
- Easy Routine Cleaning
Introducción del producto
Thin-film epoxy floor coating is a primer-and-topcoat system intended for sound, level concrete exposed mainly to pedestrian use and light wheeled traffic. The low-build resin penetrates and seals the prepared surface, reducing concrete dust and creating a uniform colored finish without the material consumption of a self-leveling screed. It is well suited to clean support rooms and circulation areas where the slab is already flat and heavy impact, deep chemical exposure or crack accommodation are not primary requirements.
Características clave
A pigmented film increases light reflectance and makes dirt or spills easier to identify during inspection.
Multiple thin coats provide more even coverage and fewer holidays than one overloaded roller pass.
Localized recoating can refresh traffic lanes after cleaning and mechanical surface preparation.
Preocupaciones del producto del cliente
Light-duty rooms need dust control and washability, but a thick industrial screed may add unnecessary cost and downtime.
Bare concrete releases fine dust into adjacent controlled spaces.A penetrating primer and epoxy finish bind the surface and close exposed cement paste.
Dark or stained slabs make routine housekeeping inspection difficult.A uniform light-colored coating improves visibility of residue, leaks and wear.
A thick self-leveling floor is unnecessary in a pedestrian-only room.The 0.15–0.40 mm coating provides practical protection with lower resin consumption.
Roller marks and patchy gloss make a small clean area look unfinished.Controlled coverage, cross-rolling and a second finish coat produce more consistent color and sheen.
Aplicaciones típicas
Cleanroom change areasLight-duty laboratoriesUtility corridorsInspection roomsControlled storage rooms
Parámetros técnicos
Representative construction data for a two- or three-coat thin-film epoxy system are provided below.
| Materiales Core | Two-part pigmented epoxy coating over a compatible penetrating epoxy primer |
|---|---|
| Panel de espesor | 0.15–0.40 mm total dry film thickness |
| Ancho efectivo | Typically 3000–6000 mm roller application bay width |
| Longitud máxima | Typically up to 25000 mm continuous coated run between slab joints |
| Acero frente a espesor | 0 mm; the floor coating contains no steel facing layer |
| Densidad Core | Approximately 1200–1450 kg/m³ for mixed coating resin |
| Conductividad térmica | Typically 0.25–0.38 W/(m·K) for the cured epoxy film |
| Superficie acabada | Smooth gloss or low-sheen roller finish with optional fine anti-slip additive |
| Tipo conjunto | Multi-coat bonded film with cracks repaired before coating and slab movement joints left active |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Two-coat or primer-plus-two-coat buildGloss or low-sheen finishFine slip additive for entrancesColored walkways and line marking
Planning a Thin-Film Epoxy Floor Coating specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
