Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Instrumentos de ensaio e validação de sala limpa
Medidor de temperatura e umidade
A portable digital meter with an interchangeable probe for spot measurement of relative humidity, temperature and calculated moisture parameters.
- Humidity and temperature together.
- Detachable precision sensing probe.
- Dew-point and survey functions.
Introdução do produto
The handheld indicator pairs a clear backlit display with a stable capacitive humidity probe and precision temperature element. Live values, minimum and maximum readings, hold functions and calculated dew-point information support room surveys and HVAC checks. A detachable cable probe reaches supply grilles, chambers and equipment spaces while the molded instrument remains comfortably in hand.
Características-chave
Calculated dew point helps interpret condensation risk.
Detachable probe supports access to confined measurement locations.
Hold and minimum/maximum functions simplify manual survey records.
Backlit display remains legible in plant rooms and service spaces.
Protective probe cap reduces sensor exposure during transport.
Preocupações do produto do cliente
Environmental spot checks require stable sensing at the actual measurement point, readable simultaneous values and a practical way to capture changing room conditions.
Separate instruments make spot surveys slower and harder to compare.The display presents humidity and temperature together from one stabilized probe.
The sensing point may be inside a grille or restricted enclosure.A detachable cabled probe reaches the location while the indicator stays accessible.
Short-term fluctuations can make a single reading misleading.Minimum, maximum and hold functions capture useful values during the survey interval.
The humidity sensor can be exposed during transport.A ventilated protective cap shields the probe while allowing quick preparation for use.
Aplicações típicas
Cleanroom temperature and humidity surveysHVAC commissioning checksStorage and warehouse inspectionsLaboratory environmental verificationDew-point and condensation-risk assessment
Parâmetros técnicos
Representative handheld meter construction is summarized below; probe geometry, cable length and data functions can be selected for the measurement task.
| Material principal | ABS handheld housing, capacitive humidity sensor, precision temperature element and stainless probe tube |
|---|---|
| Painel de espessura | Typically 1.5-2.5 mm for molded instrument shell |
| Largura efetiva | Approximately 55-85 mm across the handheld indicator |
| Comprimento máximo | Approximately 160-220 mm for indicator; probe typically 100-250 mm |
| Aço enfrentando espessura | Typically 0.3-0.8 mm for stainless probe sheath |
| Densidade Core | Approximately 1040-1100 kg/m³ for the ABS housing |
| Condutividade térmica | Approximately 0.17-0.23 W/(m·K) for the ABS housing |
| Superfície acabado | Dark-gray and blue molded housing with clear display window and satin stainless probe |
| Tipo conjunto | Locking probe connector with replaceable sensor cap and battery compartment seal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Integrated or cabled probeSlim insertion probeExtended probe cableCalibration accessory kitProtective carrying casePC data-transfer interface
Planning a Temperature and Humidity Meter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
