Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Temperatura y Humedad Meter por
A portable digital meter with an interchangeable probe for spot measurement of relative humidity, temperature and calculated moisture parameters.
- Humidity and temperature together.
- Detachable precision sensing probe.
- Dew-point and survey functions.
Introducción del producto
The handheld indicator pairs a clear backlit display with a stable capacitive humidity probe and precision temperature element. Live values, minimum and maximum readings, hold functions and calculated dew-point information support room surveys and HVAC checks. A detachable cable probe reaches supply grilles, chambers and equipment spaces while the molded instrument remains comfortably in hand.
Características clave
Calculated dew point helps interpret condensation risk.
Detachable probe supports access to confined measurement locations.
Hold and minimum/maximum functions simplify manual survey records.
Backlit display remains legible in plant rooms and service spaces.
Protective probe cap reduces sensor exposure during transport.
Preocupaciones del producto del cliente
Environmental spot checks require stable sensing at the actual measurement point, readable simultaneous values and a practical way to capture changing room conditions.
Separate instruments make spot surveys slower and harder to compare.The display presents humidity and temperature together from one stabilized probe.
The sensing point may be inside a grille or restricted enclosure.A detachable cabled probe reaches the location while the indicator stays accessible.
Short-term fluctuations can make a single reading misleading.Minimum, maximum and hold functions capture useful values during the survey interval.
The humidity sensor can be exposed during transport.A ventilated protective cap shields the probe while allowing quick preparation for use.
Aplicaciones típicas
Cleanroom temperature and humidity surveysHVAC commissioning checksStorage and warehouse inspectionsLaboratory environmental verificationDew-point and condensation-risk assessment
Parámetros técnicos
Representative handheld meter construction is summarized below; probe geometry, cable length and data functions can be selected for the measurement task.
| Materiales Core | ABS handheld housing, capacitive humidity sensor, precision temperature element and stainless probe tube |
|---|---|
| Panel de espesor | Typically 1.5-2.5 mm for molded instrument shell |
| Ancho efectivo | Approximately 55-85 mm across the handheld indicator |
| Longitud máxima | Approximately 160-220 mm for indicator; probe typically 100-250 mm |
| Acero frente a espesor | Typically 0.3-0.8 mm for stainless probe sheath |
| Densidad Core | Approximately 1040-1100 kg/m³ for the ABS housing |
| Conductividad térmica | Approximately 0.17-0.23 W/(m·K) for the ABS housing |
| Superficie acabada | Dark-gray and blue molded housing with clear display window and satin stainless probe |
| Tipo conjunto | Locking probe connector with replaceable sensor cap and battery compartment seal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Integrated or cabled probeSlim insertion probeExtended probe cableCalibration accessory kitProtective carrying casePC data-transfer interface
Planning a Temperature and Humidity Meter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
