Temperature and humidity meter in three-quarter view with probe

クリーンルーム試験 · 検証機器

温度および湿度計

A portable digital meter with an interchangeable probe for spot measurement of relative humidity, temperature and calculated moisture parameters.

Humidity and temperature together.
Detachable precision sensing probe.
Dew-point and survey functions.

見積もりリクエスト製品案内

商品紹介

The handheld indicator pairs a clear backlit display with a stable capacitive humidity probe and precision temperature element. Live values, minimum and maximum readings, hold functions and calculated dew-point information support room surveys and HVAC checks. A detachable cable probe reaches supply grilles, chambers and equipment spaces while the molded instrument remains comfortably in hand.

主要な特徴

Simultaneous humidity and temperature display speeds environmental checks.

Calculated dew point helps interpret condensation risk.

Detachable probe supports access to confined measurement locations.

Hold and minimum/maximum functions simplify manual survey records.

Backlit display remains legible in plant rooms and service spaces.

Protective probe cap reduces sensor exposure during transport.

お客様の製品に関する懸念事項

Environmental spot checks require stable sensing at the actual measurement point, readable simultaneous values and a practical way to capture changing room conditions.

Separate instruments make spot surveys slower and harder to compare.The display presents humidity and temperature together from one stabilized probe.

The sensing point may be inside a grille or restricted enclosure.A detachable cabled probe reaches the location while the indicator stays accessible.

Short-term fluctuations can make a single reading misleading.Minimum, maximum and hold functions capture useful values during the survey interval.

The humidity sensor can be exposed during transport.A ventilated protective cap shields the probe while allowing quick preparation for use.

典型的な用途

Cleanroom temperature and humidity surveysHVAC commissioning checksStorage and warehouse inspectionsLaboratory environmental verificationDew-point and condensation-risk assessment

技術的なパラメータ

Representative handheld meter construction is summarized below; probe geometry, cable length and data functions can be selected for the measurement task.

コア材料	ABS handheld housing, capacitive humidity sensor, precision temperature element and stainless probe tube
パネルの厚さ	Typically 1.5-2.5 mm for molded instrument shell
有効幅	Approximately 55-85 mm across the handheld indicator
最大長さ	Approximately 160-220 mm for indicator; probe typically 100-250 mm
鋼鉄の厚さを直面する	Typically 0.3-0.8 mm for stainless probe sheath
コア密度	Approximately 1040-1100 kg/m³ for the ABS housing
熱伝導率	Approximately 0.17-0.23 W/(m·K) for the ABS housing
表面仕上げ	Dark-gray and blue molded housing with clear display window and satin stainless probe
ジョイントタイプ	Locking probe connector with replaceable sensor cap and battery compartment seal
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Integrated or cabled probeSlim insertion probeExtended probe cableCalibration accessory kitProtective carrying casePC data-transfer interface

Planning a Temperature and Humidity Meter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する