English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
درجة الحرارة والرطوبة متر
A portable digital meter with an interchangeable probe for spot measurement of relative humidity, temperature and calculated moisture parameters.
- Humidity and temperature together.
- Detachable precision sensing probe.
- Dew-point and survey functions.
مقدمة المنتج
The handheld indicator pairs a clear backlit display with a stable capacitive humidity probe and precision temperature element. Live values, minimum and maximum readings, hold functions and calculated dew-point information support room surveys and HVAC checks. A detachable cable probe reaches supply grilles, chambers and equipment spaces while the molded instrument remains comfortably in hand.
الخصائص الرئيسية
Calculated dew point helps interpret condensation risk.
Detachable probe supports access to confined measurement locations.
Hold and minimum/maximum functions simplify manual survey records.
Backlit display remains legible in plant rooms and service spaces.
Protective probe cap reduces sensor exposure during transport.
مخاوف المنتج للعملاء
Environmental spot checks require stable sensing at the actual measurement point, readable simultaneous values and a practical way to capture changing room conditions.
Separate instruments make spot surveys slower and harder to compare.The display presents humidity and temperature together from one stabilized probe.
The sensing point may be inside a grille or restricted enclosure.A detachable cabled probe reaches the location while the indicator stays accessible.
Short-term fluctuations can make a single reading misleading.Minimum, maximum and hold functions capture useful values during the survey interval.
The humidity sensor can be exposed during transport.A ventilated protective cap shields the probe while allowing quick preparation for use.
تطبيقات نموذجية
Cleanroom temperature and humidity surveysHVAC commissioning checksStorage and warehouse inspectionsLaboratory environmental verificationDew-point and condensation-risk assessment
المعلمات الفنية
Representative handheld meter construction is summarized below; probe geometry, cable length and data functions can be selected for the measurement task.
| المواد الأساسية | ABS handheld housing, capacitive humidity sensor, precision temperature element and stainless probe tube |
|---|---|
| سمك اللوحة | Typically 1.5-2.5 mm for molded instrument shell |
| العرض الفعال | Approximately 55-85 mm across the handheld indicator |
| الحد الأقصى الطول | Approximately 160-220 mm for indicator; probe typically 100-250 mm |
| الصلب يواجه سمك | Typically 0.3-0.8 mm for stainless probe sheath |
| الكثافة الأساسية | Approximately 1040-1100 kg/m³ for the ABS housing |
| الموصلية الحرارية | Approximately 0.17-0.23 W/(m·K) for the ABS housing |
| إنهاء السطح | Dark-gray and blue molded housing with clear display window and satin stainless probe |
| نوع المشترك | Locking probe connector with replaceable sensor cap and battery compartment seal |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Integrated or cabled probeSlim insertion probeExtended probe cableCalibration accessory kitProtective carrying casePC data-transfer interface
Planning a Temperature and Humidity Meter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
