Temperature and humidity meter in three-quarter view with probe

클린룸 테스트 및 검증 장비

온도 및 습도 계량기

A portable digital meter with an interchangeable probe for spot measurement of relative humidity, temperature and calculated moisture parameters.

Humidity and temperature together.
Detachable precision sensing probe.
Dew-point and survey functions.

견적 요청 제품 찾아보기

상품 소개

The handheld indicator pairs a clear backlit display with a stable capacitive humidity probe and precision temperature element. Live values, minimum and maximum readings, hold functions and calculated dew-point information support room surveys and HVAC checks. A detachable cable probe reaches supply grilles, chambers and equipment spaces while the molded instrument remains comfortably in hand.

주요 기능

Simultaneous humidity and temperature display speeds environmental checks.

Calculated dew point helps interpret condensation risk.

Detachable probe supports access to confined measurement locations.

Hold and minimum/maximum functions simplify manual survey records.

Backlit display remains legible in plant rooms and service spaces.

Protective probe cap reduces sensor exposure during transport.

고객 제품 관심사

Environmental spot checks require stable sensing at the actual measurement point, readable simultaneous values and a practical way to capture changing room conditions.

Separate instruments make spot surveys slower and harder to compare.The display presents humidity and temperature together from one stabilized probe.

The sensing point may be inside a grille or restricted enclosure.A detachable cabled probe reaches the location while the indicator stays accessible.

Short-term fluctuations can make a single reading misleading.Minimum, maximum and hold functions capture useful values during the survey interval.

The humidity sensor can be exposed during transport.A ventilated protective cap shields the probe while allowing quick preparation for use.

일반적인 응용 프로그램

Cleanroom temperature and humidity surveysHVAC commissioning checksStorage and warehouse inspectionsLaboratory environmental verificationDew-point and condensation-risk assessment

기술 매개변수

Representative handheld meter construction is summarized below; probe geometry, cable length and data functions can be selected for the measurement task.

핵심 재료	ABS handheld housing, capacitive humidity sensor, precision temperature element and stainless probe tube
패널 두께	Typically 1.5-2.5 mm for molded instrument shell
유효 폭	Approximately 55-85 mm across the handheld indicator
최대 길이	Approximately 160-220 mm for indicator; probe typically 100-250 mm
강철 면면 두께	Typically 0.3-0.8 mm for stainless probe sheath
코어 밀도	Approximately 1040-1100 kg/m³ for the ABS housing
열전도도 (Thermal Conductivity)	Approximately 0.17-0.23 W/(m·K) for the ABS housing
표면 마무리	Dark-gray and blue molded housing with clear display window and satin stainless probe
접합 유형	Locking probe connector with replaceable sensor cap and battery compartment seal
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Integrated or cabled probeSlim insertion probeExtended probe cableCalibration accessory kitProtective carrying casePC data-transfer interface

Planning a Temperature and Humidity Meter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.